Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Question about Ultimates from HAPP  (Read 1024 times)

0 Members and 1 Guest are viewing this topic.

chrisindfw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 262
  • Last login:May 09, 2020, 05:57:34 pm
  • I drank what?
Question about Ultimates from HAPP
« on: January 02, 2004, 11:02:52 am »
How big does the hole on my control panel artwork need to be for the Ultimates stick to move without messing with my artwork?

Thanks
Logged

OSCAR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Last login:September 06, 2018, 11:31:53 pm
  • I think Bigfoot is blurry, that's the problem...
    • Oscar Controls
Re:Question about Ultimates from HAPP
« Reply #1 on: January 02, 2004, 11:39:10 am »
A 1-1/8" hole will work, but make sure you have it centered if you are using a 3/4" wood control panel.

If you will be installing the dust cover on top of a wood control panel, figure that the 2" dust cover will take up approx the same area as a 2-5/8" diameter circle when the joystick moves full travel in all directions, if that is a concern for your artwork.

Logged

chrisindfw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 262
  • Last login:May 09, 2020, 05:57:34 pm
  • I drank what?
Re:Question about Ultimates from HAPP
« Reply #2 on: January 02, 2004, 11:42:25 am »
Pardon my stupidity. What exactly is the dust cover?

Logged

OSCAR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Last login:September 06, 2018, 11:31:53 pm
  • I think Bigfoot is blurry, that's the problem...
    • Oscar Controls
Re:Question about Ultimates from HAPP
« Reply #3 on: January 02, 2004, 11:46:30 am »
The large 2" diameter plastic washer that is sometimes installed on top of the control panel (most wood control games), or underneath the control panel (if metal cp).


Logged

chrisindfw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 262
  • Last login:May 09, 2020, 05:57:34 pm
  • I drank what?
Re:Question about Ultimates from HAPP
« Reply #4 on: January 02, 2004, 11:47:35 am »
Thanks! Thought that was what it was called.

Logged

2slk

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 180
  • Last login:February 27, 2004, 11:38:09 pm
  • Fascinating, Captain.
Re:Question about Ultimates from HAPP
« Reply #5 on: January 04, 2004, 01:17:46 am »
My advice would be to worry less about the holes for now and worry more about exchanging the ultimates for comps or returning them and buying J-sticks or T-Sticks. Just my opinion. Don't want to start another joystick war here.
Logged
Pages: [1]
  
Go Up
« previous next »