Author Topic: UTRAK right and left in reverse - up and down are fine - help! (Read 980 times)

studi27 · « **on:** May 14, 2015, 03:34:28 pm »

Hi - I have U-TRAK connected directly into the trackball connections on my IPAC Ultimate. The trackball works fine for up and down, but left and right are reversed - is there a fix around? I tried manually setting to x and y and back again in WinIpac but it doesn't have any effect.

Any help appreciated.

thanks,

yamatetsu · « **Reply #1 on:** May 14, 2015, 04:22:32 pm »

Sounds like you swapped these two cables when connecting it.

Those are responsible for the X-axis.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: UTRAK right and left in reverse - up and down are fine - help! (Read 980 times)

studi27

UTRAK right and left in reverse - up and down are fine - help!

yamatetsu

Re: UTRAK right and left in reverse - up and down are fine - help!