Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Ready to print artwork...what type of vinyl/laminate am I asking for?  (Read 807 times)

0 Members and 1 Guest are viewing this topic.

j1345

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 68
  • Last login:April 12, 2020, 03:38:08 am
  • I want to build my own arcade controls!
I'm finally ready to print the art work for the vigolix...

I'm using a local printing company but have no idea what laminate everyone is using for their arcade builds?  Does the below sound right?

2 Inkjet Print on adhesive backed vinyl
2 Lam Cold Matte 900 Sq. In.

Thanks in advance...

j1345

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 68
  • Last login:April 12, 2020, 03:38:08 am
  • I want to build my own arcade controls!
Re: Ready to print artwork...what type of vinyl/laminate am I asking for?
« Reply #1 on: April 30, 2015, 02:05:43 pm »
One more:

Have any of you printed the marquee as a Duratrans to have the backlighting really pop the art?

j1345

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 68
  • Last login:April 12, 2020, 03:38:08 am
  • I want to build my own arcade controls!
Went with the duratrans for the marquee on my expanded Vigoix...

I went with an LED strip from Amazon that plugs into an outlet to light the marquee. 

Control panel parts are ordered and has been shipped, art is being printed and on its way by end of next week, stereo is ready, amp is purchased, wood stain is purchased

MALA is partly configured. 

Hope it all comes out ok... 

Should be 3/4 way done in 2 weeks!!!