Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Any draw backs to using the Mini Pac for a first build?  (Read 1641 times)

0 Members and 1 Guest are viewing this topic.

j1345

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 68
  • Last login:April 12, 2020, 03:38:08 am
  • I want to build my own arcade controls!
Any draw backs to using the Mini Pac for a first build?
« on: April 21, 2015, 04:32:41 pm »
Hi,

I'm hooking up 2 joysticks, 16 buttons and 2 player buttons...

Any draw backs to getting the Mini Pac instead of the Ipac II?  (The Ipac II is out of stock)

Thanks!
Logged

surface tension

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 323
  • Last login:July 01, 2018, 08:45:48 am
  • feel the tension...
    • surface tension tables
Re: Any draw backs to using the Mini Pac for a first build?
« Reply #1 on: April 22, 2015, 08:09:48 am »
None at all! As long as you're fine with the headers over the screw terminals.
Logged

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Any draw backs to using the Mini Pac for a first build?
« Reply #2 on: April 23, 2015, 11:01:32 am »
Have you looked at other ipac2 such as the VE edition?  Should be OK for regular setups.
Logged

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4779
  • Last login:July 11, 2025, 09:17:44 am
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Any draw backs to using the Mini Pac for a first build?
« Reply #3 on: April 23, 2015, 11:46:46 am »
The I-Pac 2 is in stock again as of 11:46am on 4/23.

D
Logged
Stop by my Youtube channel and leave a comment:

nofxbam

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • Last login:July 09, 2016, 01:31:09 am
  • I want to build my own arcade controls!
Re: Any draw backs to using the Mini Pac for a first build?
« Reply #4 on: April 23, 2015, 01:17:24 pm »
For that large amount of buttons I wouldn't recommend it. Remember each direction (P1 up, P1 down, etc) is a button as well. I have the mini on a 2 player arcade with 6 buttons per player, two sticks, two coin buttons, two start buttons, and escape. It was hard to avoid using buttons that Windows uses for other functions/shortcuts like Q, Esc, space, etc.  You're kinda limited!
Logged

smalltownguy

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 924
  • Last login:February 13, 2023, 10:48:26 am
Re: Any draw backs to using the Mini Pac for a first build?
« Reply #5 on: April 23, 2015, 03:49:31 pm »
Should work perfectly. I'm using a Minipac in that same type of setup, in addition to a trackball and spinner. I'm also powering some LED start buttons on my cab with it too. It's a handy little device :)
Logged
Man, will my cab EVER be finished?

j1345

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 68
  • Last login:April 12, 2020, 03:38:08 am
  • I want to build my own arcade controls!
Re: Any draw backs to using the Mini Pac for a first build?
« Reply #6 on: April 23, 2015, 04:53:04 pm »
Quote from: smalltownguy on April 23, 2015, 03:49:31 pm
Should work perfectly. I'm using a Minipac in that same type of setup, in addition to a trackball and spinner. I'm also powering some LED start buttons on my cab with it too. It's a handy little device :)

Can you post some picts on how you hooked up the power to power up the LED?  Didn't know the minpac could power up the LEDs?  Can you list why type of LEDs you use in your set up also.  Would like to follow your set up.  I was going to settle with non LED lights as the powering them up was over my head.  LOL
Logged

smalltownguy

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 924
  • Last login:February 13, 2023, 10:48:26 am
Re: Any draw backs to using the Mini Pac for a first build?
« Reply #7 on: April 23, 2015, 06:59:39 pm »
I only used it to power the volcano switches on my Rolling Thunder control panel. The minipac flashes the LED's for the Atari games that used blinking start switches, like Missile Command, Dug Dug, etc.
Logged
Man, will my cab EVER be finished?

j1345

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 68
  • Last login:April 12, 2020, 03:38:08 am
  • I want to build my own arcade controls!
Re: Any draw backs to using the Mini Pac for a first build?
« Reply #8 on: April 24, 2015, 10:53:28 am »
Quote from: smalltownguy on April 23, 2015, 06:59:39 pm
I only used it to power the volcano switches on my Rolling Thunder control panel. The minipac flashes the LED's for the Atari games that used blinking start switches, like Missile Command, Dug Dug, etc.

Are they working (drawing power) via the usb connection only? Or do you have another power source connected?

Logged
Pages: [1]
  
Go Up
« previous next »