Author Topic: * RESOLVED * do I need to use Start and Coin wires to my buttons (Read 866 times)

dashingw · « **on:** April 02, 2015, 04:14:40 pm »

Okay Probably a stupid question but im wiring up an Ipac Ultimate to 2 joysticks and 11 buttons. Thats it ,so I am going to have a bunch of wires and daisy chain wires left over that just hang there and go nowhwere.

I dont see any reason to use the start and coin slots for buttons as I can make any button do that anyway correct ?? Or am I missing something.

I'm just making a One Player with 2 Joys, 8 Player 1 buttons and 3 misc buttons at the top I will use for Start, Coin ans Esc...

So Obviously I will have to use the 2 Player joy slots for the other player 1 joystick and 3 buttons from the player 2 for the buttons at the top...

yotsuya · « **Reply #1 on:** April 02, 2015, 04:21:32 pm »

Just make your life simple and wire up those buttons. That way you don't have to reprogram anything.

dashingw · « **Reply #2 on:** April 02, 2015, 10:19:30 pm »

Thanks, got it all working good, much easier than I thought it was going to be !!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: * RESOLVED * do I need to use Start and Coin wires to my buttons (Read 866 times)

dashingw

* RESOLVED * do I need to use Start and Coin wires to my buttons

yotsuya

Re: do I need to use Start and Coin wires to my buttons

dashingw

Re: do I need to use Start and Coin wires to my buttons