CTI-1SC LID ROWE/AMI

[mtnchps]

Wanted: Looking for a lid for a Rowe/Ami  CTI-1SC . If anyone has one or know where i can get one please email me! Thanks MTNCHPS

[ami-man]

Hi,

More than likely I have both, I know I have CTI-2 lids.

I am in the UK however.

Regards
Alan

Alan Hood
ami-man
UK

[mtnchps]

Hi,
    I'd rather have the CTI-1 lid but the CTI-2 would be good as well! How much and what would the cost of shipping to OAK LAWN ,IL 60453 would be? Th Do you have a CTI-1S lid because thats the jukebox I have? Would the CTI-1 OR CTI-2 fit on that jukebox? Thanks Bob

[ami-man]

Hi Bob.

Here are the measurements of the three jukeboxes that are totally different.

CTI-1 Crestwood 1974:-

Height 32 13/16 inches (lid closed) width 52 3/4 inches depth 24 inches

CTI-1SC Camelot 1978:-

Height 32 13/16 inches (lid closed) width 52 3/4inches depth 25 inches

CTI-2 Kentwood 1979:-

Height 31 3/4 inches (lid closed) 51 1/8 inches (lid open & braced on brackets) width 47 inches depth 27 inches
there is speakers that are built into the front of the lid and domed plastic covers on the back of the lid, the lid does not reach the front of the jukebox. On this jukebox the lid is only lowered for transportation.

I suggest that you contact Tony Duree at www.jukeboxparts.com to see if he has a CTI-1SC lid available.

I only have a CTI-2 lid which would be totally unsuitable and the shipping charges top the USA would be crippling due to the weight of the lid and the size of it.

You could of course make one yourself out of laminated chipboard (this was what the original lid would have been made from). The CTI-1 was made from a moulded frame with a chipboard or ply inset panel with a picture on the inside and a leathercloth/imitation slate inset panel on the outside which was seen when closed.

If you want to see all three models then visit the Stamann website www.jukebox-world.de and go into the archive section and click on the picture of Rowe Ami it will show you all of the Rowe Ami models and then click on the camera to see pictures of the models.
It is a very good site and Hildegard & Oliver are nice people.

Regards
Alan

Alan Hood
ami-man
UK

[mtnchps]

Hi Alan,
         
           Thank you for the info! I threw that out there just to see how much it would really cost! I got a hold of Dupree to see if he had the other lids and he said no but didnt ask him about the SC! I will try him one more time! Thanks again!




     Bob

[mtnchps]

Hey Alan,

             Dupree doesnt have that lid either and Ive emailed 12 different guys and none of them have any of the lids! Frustrating !



              Bob