Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: I found a good place for my pedals.  (Read 1979 times)

0 Members and 1 Guest are viewing this topic.

chopperthedog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1049
  • Last login:Today at 05:24:55 pm
I found a good place for my pedals.
« on: February 17, 2015, 06:39:36 pm »
The accelerator and brake paddles on my wheel are OK for some games and having the pedals on the ground was awkward. I've been playing a lot of rfactor "dirt works designs" and that game requires working the crap out of the wheel and being able to feather the throttle. Got to looking at the lower coin door and wondered. Well, I wish I did this years ago. Works out great sitting down. I did have to jigsaw about 2" off the front of the pedal plate so that the pedals weren't set too far back.


good day.
« Last Edit: February 17, 2015, 07:33:52 pm by chopperthedog »
Logged

Slippyblade

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3167
  • Last login:June 05, 2024, 10:30:57 am
  • And to the death god we say, "Not today!"
Re: I found a good place for my pedals.
« Reply #1 on: February 17, 2015, 07:14:05 pm »
That's a great idea!  I'm assuming the wheel detaches when not in use?
Logged

chopperthedog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1049
  • Last login:Today at 05:24:55 pm
Re: I found a good place for my pedals.
« Reply #2 on: February 17, 2015, 07:24:37 pm »
The mounting method for the wheel has been used on this cab for almost  10 years. It's on and off in 5 seconds with quick plugs on the side. I just never found a good way to use the pedals, til now.



good day.
Logged

Slippyblade

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3167
  • Last login:June 05, 2024, 10:30:57 am
  • And to the death god we say, "Not today!"
Re: I found a good place for my pedals.
« Reply #3 on: February 17, 2015, 07:28:59 pm »
Modified panel clamps, nice!
Logged
Pages: [1]
  
Go Up
« previous next »