Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Ipac 2 (2015 USB) Not Recognized  (Read 4393 times)

0 Members and 1 Guest are viewing this topic.

creesy

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:February 16, 2015, 06:01:57 pm
  • I want to build my own arcade controls!
Ipac 2 (2015 USB) Not Recognized
« on: February 16, 2015, 03:08:36 am »
Was working fine then i reset the pc and nothing

Only Shows up in Device Manager as Uhid Firmware update but windows cant find a driver.

Tried disconnect every button and only having 1 button and 1 GND connected still nothing (not even a led light flash on plugging it in)

The only thing is windows recognizes it and tries to find a driver for that UHID Firmware update but cant.

At my wits end everything was working perfectly reset the computer and then nothing  :banghead: :banghead:
Logged

Hoopz

  • Don't brand me a troublemaker!
  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5285
  • Last login:June 13, 2025, 09:18:32 pm
  • Intellivision Rocks!
Re: Ipac 2 (2015 USB) Not Recognized
« Reply #1 on: February 16, 2015, 06:44:38 am »
Remove the device (left click) under device manager and then plug it back in. 
Logged

Hoopz

  • Don't brand me a troublemaker!
  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5285
  • Last login:June 13, 2025, 09:18:32 pm
  • Intellivision Rocks!
Re: Ipac 2 (2015 USB) Not Recognized
« Reply #2 on: February 16, 2015, 07:09:58 am »
I said left click but meant right click...
Logged

creesy

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:February 16, 2015, 06:01:57 pm
  • I want to build my own arcade controls!
Re: Ipac 2 (2015 USB) Not Recognized
« Reply #3 on: February 16, 2015, 05:54:57 pm »
Thanks for the reply i tried that for whatever reason it didnt work.

But i did resolve the issue.

Windows couldnt find the driver itself so i showed it where to find the drivers for the UHID (In the*\Winipac\drivers folder)  That got windows to recognise the board which for whatever reason seemed to have lost its firmware or was stuck in a firmware update mode,  I then flashed it with the latest firmware and it was all up and running.

Now to get back to the frustration that is setting up hyperspin :banghead: :dizzy:
Logged
Pages: [1]
  
Go Up
« previous next »