Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: CD-100C new selection entered won't play  (Read 2170 times)

0 Members and 1 Guest are viewing this topic.

actman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 62
  • Last login:April 18, 2024, 12:17:27 pm
  • I want to build my own arcade controls!
CD-100C new selection entered won't play
« on: February 09, 2015, 12:08:05 pm »
My Jukebox sometimes with not play a selection. The jukebox will be playing and I enter the next selection but it does not play it. If I unplug the box and power it back on it still will not work. I have to do a computer reset to get it to work again. That's a pain cause I have to go back into service mode and make changes to all my setting I like.
I have a wireless remote and I'm not sure if it has to do with entering selections with it that cause the lock up. The CCC rom chip has been updated to the current one so it will work proper with the wireless remote. Has anybody had this issue before. The only good thing is I can get it back working with the reset. (service mode....power switch off ..holding 1 and 2 key down while turning power slider switch on) The eprom will reboot.