Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: 412 in 1, 4 way or 8 way joysticks?  (Read 2003 times)

0 Members and 1 Guest are viewing this topic.

pappascw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 28
  • Last login:Yesterday at 12:18:12 pm
  • I want to build my own arcade controls!
412 in 1, 4 way or 8 way joysticks?
« on: January 11, 2015, 08:46:19 am »
I build a cocktail cab over the holidays.  Need to go in today and mount a few buttons and want this to be the last time I open it back up for now.  I have the joysticks set up as 8 way now, thinking about changing over to 4 way.  Kids mostly play Ms Pacman but are there any games on the Veritical boards the need the 8 way config?

Sarver Systems

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 937
  • Last login:October 07, 2020, 12:46:05 am
Re: 412 in 1, 4 way or 8 way joysticks?
« Reply #1 on: January 12, 2015, 03:07:26 pm »
I found that normal 4-way games are next to impossible to play with the sticks set in 8-way mode.

8-way games will not work AT ALL with the sticks set in 4-way mode.

See my review in the reviews section for more info.

mgb

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3500
  • Last login:July 28, 2025, 09:45:32 pm
  • North East, US
Re: 412 in 1, 4 way or 8 way joysticks?
« Reply #2 on: January 12, 2015, 09:18:22 pm »
With those xxx in 1 boards, you've got to think about the games that most  important to you and
Figure which way to go, 4 or 8 way. Personally to me, I'd prefer having proper play for the many 4-way vertical games.
You're best off with physically restricted joysticks too, rather than happs with flipped actuators.

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4779
  • Last login:July 11, 2025, 09:17:44 am
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: 412 in 1, 4 way or 8 way joysticks?
« Reply #3 on: January 12, 2015, 10:42:22 pm »
Why not pop Ultimarc Servo Sticks in there, set them up for "Hardware mode" and then simply press 2 buttons down on the control panel to switch between 4 and 8 way?

http://www.ultimarc.com/servostik.html

D
Stop by my Youtube channel and leave a comment:

newoski

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 226
  • Last login:February 26, 2021, 07:44:50 am
  • I want to build my own arcade controls!
Re: 412 in 1, 4 way or 8 way joysticks?
« Reply #4 on: January 13, 2015, 11:47:23 pm »
+1 for ServoStiks

behrmr

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 459
  • Last login:April 23, 2021, 09:17:13 am
Re: 412 in 1, 4 way or 8 way joysticks?
« Reply #5 on: January 14, 2015, 12:00:59 am »
If pac-man and other 4-way games are your target just put the sticks in 4-way mode and leave them.  Most likely no-one will even notice.  But if you put them in 8-way they will notice that the 4-ways don't play right.  There's already enough lag on the 412-in-1 pac-man to make you nuts as it is without throwing an 8-way stick on there.   A servo-stick would be nice but they're all little pricey and don't you need to add 2 more buttons (or a toggle) to your control panel?  So if you're almost done that would add a lot more work.

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4779
  • Last login:July 11, 2025, 09:17:44 am
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: 412 in 1, 4 way or 8 way joysticks?
« Reply #6 on: January 14, 2015, 03:28:06 am »
don't you need to add 2 more buttons (or a toggle) to your control panel?  So if you're almost done that would add a lot more work.
Not really too hard to add a toggle switch.  Maybe even hide it inside the coin door.
Stop by my Youtube channel and leave a comment:

pappascw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 28
  • Last login:Yesterday at 12:18:12 pm
  • I want to build my own arcade controls!
Re: 412 in 1, 4 way or 8 way joysticks?
« Reply #7 on: January 14, 2015, 09:22:18 am »
Im gonna try the 4 way mode..  Maybe change out to the SANWAS with the balls.  Kids are used to playing on my fathers MS Pacman machine and are complaining about the different top..

mgb

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3500
  • Last login:July 28, 2025, 09:45:32 pm
  • North East, US
Re: 412 in 1, 4 way or 8 way joysticks?
« Reply #8 on: January 14, 2015, 09:16:08 pm »
 While the Sanwa is not the greatest 4 way stick, it's pretty darn good.
And you can always modify it like the omni2 so you can reach under and change to 8 way if desired or add the servo stik kit in the future.