Coin box & bracket: hope FS but will donate if I'm too optimistic... [USA/91103]

[jasonbar]

Coin door shipped.

This is now also not needed. Would love a few bucks + shipping, if possible:
Coin bucket & bracket (which was previously attached to the cab with the bottom coin door frame bolt).

See later post for pics.

Thanks,
-Jason


Coin door up for grabs. Not the prettiest, but mostly there. Was on my MAME cab until I got a bigger door.
- painted w/ Rust-Oleum black hammered paint
- no mounting hardware
- no lock
- coin return flappy doors painted red
- no coin mechs
- "push to reject" buttons neutered, secured, & 5V jumbo LEDs attached behind them for backlighting
- project boxes modded to at as coin return cubbies--good for holding keys to nonexistent barrel lock

Would like to get a few bucks for it, but will donate if that's too optimistic.

Located in Pasadena, CA. Can ship.

Hi-res pics:
https://www.dropbox.com/sh/dtsaq0jwur8j90h/AADm8cRexh8AdV-qJwigSjMUa?dl=0

Thanks,
-Jason

[yotsuya]

Coin door up for grabs. Not the prettiest, but mostly there. Was on my MAME cab until I got a bigger door.
- painted w/ Rust-Oleum black hammered paint
- no mounting hardware
- no lock
- coin return flappy doors painted red
- no coin mechs
- "push to reject" buttons neutered, secured, & 5V jumbo LEDs attached behind them for backlighting
- project boxes modded to at as coin return cubbies--good for holding keys to nonexistent barrel lock

Would like to get a few bucks for it, but will donate if that's too optimistic.

Located in Pasadena, CA. Can ship.

Hi-res pics:
https://www.dropbox.com/sh/dtsaq0jwur8j90h/AADm8cRexh8AdV-qJwigSjMUa?dl=0

Thanks,
-Jason

I'll give you the cost of shipping it. PM me your Paypal address.

[Nephasth]

I'll give you the cost of shipping it. PM me your Paypal address.

Too slow. 

[jasonbar]

Coin door assembly shipped.

Same story on this: seek some bucks but will settle for just shipping if I must.

Black plastic coin box & its steel bracket. Used but intact.

Hi-res gallery: https://www.dropbox.com/sh/egyusdft0xj881v/AADOrn6ya7dbHeWRajfDCqcua?dl=0

-J

[Shaybe]

I am interested in the box, could you give me the measurements so I can make sure it will fit in my machine?

[jasonbar]

About 10" wide x 6" deep x 8" high.

Thanks,
-Jason

[Shaybe]

I think that might fit exactly, how much do you think shipped to San Dirgo 92139?

[jasonbar]

For reference, it's packaged up & the shipping box is 14"x10"x7", 3lb.

PM incoming regarding cost to ship to you, Shaybe.

Thanks,
-Jason

[jasonbar]

Shaybe's not buying at the moment. Per his blessing, this is still up for grabs.

Will bring to Arcade Expo & donate there if I don't get a taker in the next week.

Thanks,
-Jason

[jasonbar]

Forgot to bring to Arcade Expo. Just noticed it under my desk at work. Moving to the Free Items thread.

Thanks,
-Jason