Changing tubes on NSM CD box

[Trickyeric]

Hi There.

I just bought a Hyperbeam CD jukebox by NSM. One of the vertical fluorescent bulbs in the door seems to have blown but I can't seems to find any way to access it. Anybody have any ideas? Ta

[ed12]

is this a wall mount ?

ed

[Trickyeric]

Hi

Yes it is... no obvious screws/fastenings on the inside of the door?

[ed12]

open the door
at the bottom of the door
there is a plastic piece :cover exturision:,in the center of it is a long philps screw
remove it and the plastic piece
next u will find 4 philps screws,remove them carefuly
the bottom piece of metal will come off
u then slide the plastic cover of the corner down and out
to gain access to the lamp.
reverse order once lamp is changed
now it is a 2 person job
+ on the hinge side go  very careful as the steel bracket u are going to remove
is the lower hinge

ed

[Trickyeric]

Ed,

That's fantastic.... thanks so much.

Mick

[ed12]

yw
i will add as a rule
i take the door right off,lay it flat
and do the work
but with 2 ppl u can do it right on the box
go careful,so,steady
1 side at a time,make sure the first side is back in and tight,then move to the next

ed