Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Taito Isolation Transformer  (Read 1040 times)

0 Members and 1 Guest are viewing this topic.

ripperman

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 9
  • Last login:July 28, 2014, 03:06:16 pm
Taito Isolation Transformer
« on: July 28, 2014, 09:38:26 am »
Hi guys

Can anyone confirm that this is the isolation transformer behind the monitor in my SI and that it appears to be wired ok?



Thanks
Logged

Sarver Systems

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 937
  • Last login:October 07, 2020, 12:46:05 am
Re: Taito Isolation Transformer
« Reply #1 on: July 28, 2014, 01:39:31 pm »
Sure looks like one to me. No idea on the wiring, I cant see any of it.
Logged

ed12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3972
  • Last login:March 31, 2018, 03:44:39 pm
  • it is what it is..."Nobody Said It Was Easy"....
Re: Taito Isolation Transformer
« Reply #2 on: July 28, 2014, 01:42:13 pm »
that is just a normal ac rectical

ed
Logged
Shipping something from the U.S. to Canada for repair/exchange?  Please use USPS to avoid (additional?/excessive?) shipping charges.  PM me if you have any questions.

ripperman

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 9
  • Last login:July 28, 2014, 03:06:16 pm
Re: Taito Isolation Transformer
« Reply #3 on: July 28, 2014, 02:28:58 pm »
Ok thanks.


Thats black and white wires hooked into the grid the transformer is sitting on, in the first pic I posted.


Plus this is on the cab floor...



With this wire attached...




but not connected to anything? Monitor comes on etc... but I just want to ensure that I have everything plugged in right so that something doesn't blow, that's all. Don't feel safe working on it until I know. Any ideas here?

Thanks
Logged
Pages: [1]
  
Go Up
« previous next »