.

[ChanceKJ]

.

[jdbailey1206]

Here.

[ChanceKJ]

.

[ChanceKJ]

.

[WakiMiko]

I also used them in my project and even wrote a paragraph or two about the wheels, hope this helps: http://forum.arcadecontrols.com/index.php/topic,138556.0.html

Keep in mind that the wheels are not centered in the mounting brackets.

[mattgold]

Where did you procure these casters (and feet) if I may ask?

[ChanceKJ]

.

[EMDB]

You won't regret them. Make sure the metal plates are flush with the bottom and back of your cab to be able to tilt your cab. I had to modify mine to tilt it completely.

 

I also purchased this hande from them to mount in the back plate to be able to tilt the cab to the back. I still have to do the back plate though 

[ChanceKJ]

.

[Louis Tully]

.

[PL1]

Where did you procure these casters (and feet) if I may ask?

Germany

http://www.arcadeshop.de/index.php?cPath=83_90

If you prefer to buy them stateside, see Arcadeemulator.net (Divemaster127's site) or Twisted Quarter.

They also carry leveling legs and cabinet handles.


Scott

[ChanceKJ]

.

[WakiMiko]

The spacers below my bottom plate are 19mm thick and you need at least that much otherwise the leg levers will be too long. Here is a quick drawing

Everything in mm, widths are to scale, lengths probably aren't