Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Installing J-pac controller  (Read 828 times)

0 Members and 1 Guest are viewing this topic.

jkimrey

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 40
  • Last login:February 14, 2021, 08:58:41 am
  • I want to build my own arcade controls!
Installing J-pac controller
« on: April 20, 2014, 07:18:31 am »
Hi.

After several years after purchasing the J-pac JAMMA board, I am finally trying to get it hooked up to my arcade.

Of course, after so long a delay, I *have* to be missing something. ;)

In this case, it appears to be the PS/2 cable that goes from the computer to the board (I assume it came with one of these, although I don't specifically remember it).

Does anyone know if it is possible to find a replacement cable online?  Would I just need a PS/2 cable with male ends on both sides?

Thanks!
« Last Edit: April 20, 2014, 08:50:50 am by jkimrey »
Logged

AndyWarne

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1938
  • Last login:April 11, 2021, 03:37:09 am
    • Ultimarc
Re: Installing i-pac controller
« Reply #1 on: April 20, 2014, 08:13:18 am »
Quote from: jkimrey on April 20, 2014, 07:18:31 am
Hi.

After several years after purchasing the i-pac JAMMA board, I am finally trying to get it hooked up to my arcade.

Of course, after so long a delay, I *have* to be missing something. ;)

In this case, it appears to be the PS/2 cable that goes from the computer to the board (I assume it came with one of these, although I don't specifically remember it).

Does anyone know if it is possible to find a replacement cable online?  Would I just need a PS/2 cable with male ends on both sides?

Thanks!

Several years

The cable would either have been a male-male PS/2 cable or a DIN to USB cable depending on what you ordered. We can supply the cables and send by mail to minimise shipping. Drop me an email on andy@ultimarc.com
Logged

jkimrey

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 40
  • Last login:February 14, 2021, 08:58:41 am
  • I want to build my own arcade controls!
Re: Installing i-pac controller
« Reply #2 on: April 20, 2014, 08:42:15 am »
Email sent Andy.

I also updated the thread to reflect it is a J-Pac, NOT an I-pac.

Thanks
« Last Edit: April 20, 2014, 08:51:50 am by jkimrey »
Logged

Caparo8bit

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 504
  • Last login:April 28, 2018, 02:13:32 am
  • Hyperspin/Maximus
Re: Installing i-pac controller
« Reply #3 on: April 20, 2014, 12:05:36 pm »


Several years

The cable would either have been a male-male PS/2 cable or a DIN to USB cable depending on what you ordered. We can supply the cables and send by mail to minimise shipping. Drop me an email on andy@ultimarc.com
[/quote] :applaud: thats what i call excelent C. Service.
Logged
Pages: [1]
  
Go Up
« previous next »