Author Topic: LED USB Encoder Question (Read 2118 times)

rawbe · « **on:** March 18, 2014, 11:58:26 am »

Hopefully someone can help, I purchased a "No Delay Arcade LED Encoder" from Ebay. The buttons light up when pushed. I was wondering if their is any LED software that is compatible with this type of board? I tried LEDBlinky and I get an "No Device Detected" error. I would like to have buttons do more if possible like light up during power on.

Anyone have experience with this?

Thanks!
Robbie

melvinbates · « **Reply #1 on:** March 18, 2014, 02:27:16 pm »

I'm not too familiar with them, but from what I saw on ebay
http://www.ebay.com/itm/NO-Delay-Arcade-LED-USB-Encoder-To-PC-Joystick-For-MAME-5Pin-LED-Push-Button-/201034334609?pt=US_Video_Game_Controllers&hash=item2ece948191
If it is the same as yours, it can only function to light the buttons when pressed and is not actually a USB led controller so much as a zero delay joystick encoder that can light the buttons when pressed.

rawbe · « **Reply #2 on:** March 18, 2014, 08:52:03 pm »

melvinbates- I am thinking that is the case. Thanks for the help!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: LED USB Encoder Question (Read 2118 times)

rawbe

LED USB Encoder Question

melvinbates

Re: LED USB Encoder Question

rawbe

Re: LED USB Encoder Question