Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Hantarex mtc9000  (Read 801 times)

0 Members and 1 Guest are viewing this topic.

Painter1969

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:February 21, 2014, 11:39:03 am
  • I want to build my own arcade controls!
Hantarex mtc9000
« on: February 14, 2014, 08:09:39 am »
Hi there.
Hope someone can help I have a none working chassis. Done some volts testing and getting 130+ on sp4 etc.
I am not getting any 26v. I have tracked it back to the 130v on the r90 resistor. So I changed the r90 but still The same. ( one side of the resistor read 130v the other sides is o.4v)
So from that point to tp13 only getting 0.4v.

Cheers