Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: multi-coin HS-616  (Read 1374 times)

0 Members and 1 Guest are viewing this topic.

jackiabu

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 324
  • Last login:May 18, 2025, 02:29:49 pm
    • http://jackiabu.blogspot.com/
multi-coin HS-616
« on: January 24, 2014, 09:19:50 am »
HI

Today a friend brought me COIN UP. I want to connect it to one of my machines. And pass through MAME.


According to what I read on the site of http://www.ultimarc.com/controldiags.html  Zener Diode need to connect to pass through the IPAC. And  that  for the IPAC will not be damaged.

i have no Zener Diode ,Perhaps because it was connected to the original arcade  machine :-\

My question  what Zener Diode type should I buy? What voltage of Zener Diode?






« Last Edit: January 24, 2014, 09:32:13 am by jackiabu »
Logged

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9684
  • Last login:Today at 07:22:17 pm
  • Designated spam hunter
Re: multi-coin HS-616
« Reply #1 on: January 24, 2014, 11:18:56 am »
Quote from: jackiabu on January 24, 2014, 09:19:50 am
My question  what Zener Diode type should I buy? What voltage of Zener Diode?

The IPac runs on 5v, so you'll need a 5v zener diode.

Details and a part# link in this thread.

Remember that the band on the zener diode goes toward the coin signal line (reverse biased), NOT toward ground.


Scott
Logged

jackiabu

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 324
  • Last login:May 18, 2025, 02:29:49 pm
    • http://jackiabu.blogspot.com/
Re: multi-coin HS-616
« Reply #2 on: January 24, 2014, 12:32:43 pm »
Quote from: PL1 on January 24, 2014, 11:18:56 am
Quote from: jackiabu on January 24, 2014, 09:19:50 am
My question  what Zener Diode type should I buy? What voltage of Zener Diode?

The IPac runs on 5v, so you'll need a 5v zener diode.

Details and a part# link in this thread.

Remember that the band on the zener diode goes toward the coin signal line (reverse biased), NOT toward ground.


Scott

Thanks man i will check it  ;)
Logged
Pages: [1]
  
Go Up
« previous next »