Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Where do you guys print your artwork ?  (Read 2116 times)

0 Members and 1 Guest are viewing this topic.

Xarcade

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:February 05, 2015, 09:09:38 pm
  • I want to build my own arcade controls!
Where do you guys print your artwork ?
« on: January 16, 2014, 03:25:26 pm »
So I just wanted to printout my custom CP artwork and tought, what the heck, I'll just go to Staples. Since my artwork will be sandwiched under acrylic I just chose their best quality poster paper, didn't need any fancy plastic type material or what have you. Man, does it look amazing ! Granted I don't have a lot of fine little details on my artwork but hey for 9$ can't go wrong it looks perfect. Will post pics when my CP is assembled.

Just a heads up for you guys as a cheap alternative.   :cheers:

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14019
  • Last login:Yesterday at 06:33:34 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Where do you guys print your artwork ?
« Reply #1 on: January 16, 2014, 03:36:51 pm »
I usually go to FedEx / Kinkos if its going under plexi.
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

Louis Tully

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1800
  • Last login:February 13, 2015, 09:41:03 pm
Re: Where do you guys print your artwork ?
« Reply #2 on: January 16, 2014, 03:48:10 pm »
.
« Last Edit: February 12, 2015, 04:18:33 pm by Louis Tully »

JDFan

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3448
  • Last login:March 03, 2025, 10:29:54 am
  • I want to build my own arcade controls!
Re: Where do you guys print your artwork ?
« Reply #3 on: January 16, 2014, 03:55:16 pm »
For my bartop went to office depot for the marquee since it was unlit, bottom panel, and bezel since they were less than 11x17 inch it cost 20 cents each for 2 black and white test prints (marquee and bottom panel fit on 1 sheet bezel on another) then for the final prints was $3.17 a piece on 4.7 mil polyster paper.

Xarcade

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:February 05, 2015, 09:09:38 pm
  • I want to build my own arcade controls!
Re: Where do you guys print your artwork ?
« Reply #4 on: January 16, 2014, 04:00:46 pm »
Its my first build so I tend to get really excited for each step accomplished haha... What type of material would you recomend for a lighted marquee ?