Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: mounting a betson trackball???  (Read 842 times)

0 Members and 1 Guest are viewing this topic.

tenex2mg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 57
  • Last login:August 03, 2025, 09:30:06 am
  • helllllllloooo Nurse
mounting a betson trackball???
« on: November 27, 2003, 10:39:44 am »
Got a question for any and all...I picked up a betson/imperial  2.25'' usb trackball and installed it into my cab with no problems.  However my home-made mounting plate was very functional just not too asthetically pleasing :).  So i picked up a 2.25'' Happs trackball mountingkit...and now the 4 pilot holes don't line up :(...any thoughts?

thanx,
-jeff-


Logged

mp2526

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 323
  • Last login:August 11, 2023, 02:30:47 pm
    • Miavio
Re:mounting a betson trackball???
« Reply #1 on: November 27, 2003, 12:51:29 pm »
Get a betson mounting kit?
Logged

tenex2mg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 57
  • Last login:August 03, 2025, 09:30:06 am
  • helllllllloooo Nurse
Re:mounting a betson trackball???
« Reply #2 on: November 27, 2003, 01:19:05 pm »
That's a good guess, my bad for not elaborating...according to their catalog and the guy behind the counter they (betson) don't make a mounting kit for the 2.25'' trackball...any other guesses?

thanx,
-jeff-
Logged

aricade

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:August 15, 2004, 01:38:26 pm
  • Wamma langa ding dong!
    • Isaacade
Re:mounting a betson trackball???
« Reply #3 on: November 27, 2003, 03:51:07 pm »
Goto a machine shop with your home made tb plate...  Then tell them to make it in aluminum...  then get a can of black enamel spray paint if you really want to get fancy...

It shouldn't cost that much. and would definatley not take to long..
Logged
Off all the things I've lost I miss my mind the most!!
Pages: [1]
  
Go Up
« previous next »