Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: I HAVE A ROWE AMI R90 JUKEBOX THAT SEEMS TO BE FROZE ON144 SELECTED BUT ISNT PLA  (Read 1845 times)

0 Members and 1 Guest are viewing this topic.

dennisb66630

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:January 04, 2014, 10:37:14 pm
  • I want to build my own arcade controls!
I PUT A QUARTER IN AND IT GIVES THE CREDIT BUT WONT PLAY ITS STUCK ON 144 PLAYING BUT NOTHINGS PLAYING . EVERYTIME I RESET IT IT GOS RIGHT BACK TO 144 PLAYING CAN ANYONE HELP ME OUT DENNIS
burtdennisb@aol.com

ed12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3972
  • Last login:March 31, 2018, 03:44:39 pm
  • it is what it is..."Nobody Said It Was Easy"....
yup
the batt in the ccc is shot
replace it with a new 1
first to inspect to make sure the old 1 did not leak
if it did clean the acid off..>it will look green bubbley like<
not like a trace..if all is well replace the bat
then use the service maunal to put it in service..from there go to the time clock
and set day of time and date >most important<,from there
go to the auto scan part of the program.,allow it to auto scan every selection
once done that step go to the >coin in part< to tell it what a credit is and the amount,ie .25=1/50=2/1.00=3 or such
from there save and exit
enjoy your juke

ed
Shipping something from the U.S. to Canada for repair/exchange?  Please use USPS to avoid (additional?/excessive?) shipping charges.  PM me if you have any questions.