In search of Solo/2 25/28 control board pictures or replacement

[Kirurishii]

Hi everybody,

Question, is it possible for someone to take some shots of the front and back of this tune-print?
I've got this Solo/2 25/28 inside a mighty goodlooking Silent Scope cab, but that print is missing. I've found some schematics here and there, the manual from this monitor and tried to reproduce the thing using that. It doesn't work.
The previous owner send a picture of the original board, but when I took a close look at that picture, I found some huge differences between the picture and the schematics.

So now I'm looking for someone who has the Solo2 25-28 monitor, with the pcb with the 20pins Lumberg connector and is willing to make some clear shots of the front and back, perhaps even note down the trimmer values so that I may reproduce this thing.

I've managed to make some pics from the chassis, but I found out that this pc doesn't have a SDHC reader.. But here are some pics I found on the web, so you can see what I mean:

It's the board with 10 trimmers, with a 20pins Lumberg connector.




Perhaps someone with the same controlboard is willing to shoot some pictures of the front and the back, so I may be able to figure out how to reproduce the thing. The reproduction of the schematic turned out to be a disaster so far.

Thanks in advance..

[grantspain]

that photo is a hantarex polo 2 19" svga dual focus-very rare

silent scope tended to have hantarex polo 2 25/28 auto monitors as they were ega frequency

you can find the remote boards on ebay

you u.k or u.s?

[Kirurishii]

Hi Grantspain,

Thanks for the reply.
The pictures are not the actual chassis. Inside the SC cab is the Solo2 25/28 chassis, I used the other pics because I couldn't find the right ones quickly, but the remote board looks the same. 20pin Lumberg connector, 10 trimmers, 2 ELCO's, 2 transistors and a couple of resistors.

As for the nationality, I'm NL, a dutch guy. 
I've actually tried searching ebay (.nl/.com/.co.uk/de/fr etc) usind all kinds of key words, but I really couldn't find that particular control board. If you know where to find a suitable board I'm all eyes.
So far the only option I have left is reproduction, but to be able to do so I need a correct example.

[grantspain]

try Mo at videotronics,he may not have it listed but i bet he has one
its a hantarex polo 2 auto remote board and cable you want-not solo

http://www.videotronicsuk.com/

[Kirurishii]

Polo/2 I stand corrected..

Thanks!