Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: WTB Action Claw PCB  (Read 842 times)

0 Members and 1 Guest are viewing this topic.

Techoverload

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 57
  • Last login:August 25, 2014, 10:48:18 pm
WTB Action Claw PCB
« on: December 06, 2013, 06:47:43 pm »
I am looking for the board in the below picture or a compatible board.

This is my first venture into a Claw machine. I picked up the cabinet from a friend of a friend. I was assured the claw, motors, joystick etc all work great.
The machine was working 100% but the board was pulled to put into a better condition cabinet.

Now I have the cabinet, have replaced the one piece of glass that was cracked, removed the big industrial hasps that covered the normal locks, filled the holes and is just waiting for paint.

I would like to find a board before I go any further just to make sure I am not wasting effort in something.


Techoverload

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 57
  • Last login:August 25, 2014, 10:48:18 pm
Re: WTB Action Claw PCB
« Reply #1 on: January 28, 2014, 07:01:20 pm »
Mild bump......and some incentive..... I have a original allen bradley 5k star wars yoke pot I could use as trading material if interested. It came out of a very lightly used star wars yoke, pot works perfectly game only had a little under 2k plays on the meter when it was involved in a fire years ago.