"Molex Conectors" - where to buy

[bimm25e]

So in my cabinet modd-ery I am finding I would prefer to use the stock conenctors to make adapters instead of cutting up the riginals

I need to know where to get "molex"-style connectors for 2 of my machines, one set for the NAMCO guns I have and another for an MVC2 control panel

here are pictures of the specific connectors - if anyone knows where I can get some of these I would greatly appreciate it.

[BadMouth]

Normally I'd order connectors from Digikey or Mouser, but those particular ones are usually stocked at your local RadioShack.
http://www.radioshack.com/search/index.jsp?kwCatId=13384949&kw=position%20polarized%20connector&origkw=position+polarized+connector&sr=1

EDIT: looks like except for the middle one in the bottom pic....always one short.  I can see what I have in the pile of wiring harnesses I'm hoarding, but it will be a few days before I have time to look.

[yotsuya]

I buy all my Molex from Fry's Electronics, and AMP I get from Bob Roberts.

[bimm25e]

So Thanks for the helpA I will be ordering the 9 and 12 pin connectors tonight.
http://www.mouser.com/Search/ProductDetail.aspx?R=03-09-2092virtualkey53810000virtualkey538-03-09-2092 - 9 pin, I think the male and female set.

http://www.mouser.com/Search/ProductDetail.aspx?R=03-09-1125virtualkey53810000virtualkey538-03-09-1125   -12 pin Female

http://www.mouser.com/Search/ProductDetail.aspx?R=03-09-2122virtualkey53810000virtualkey538-03-09-2122 - 12 pin male


As far as the NAMCO gun connectors go, I think found them here:  http://www.mouser.com/Search/ProductDetail.aspx?R=794895-1virtualkey57100000virtualkey571-7948951



Are these the correct size though?  I can confirm the keyholes are the same orientation.



Also will I need to be buying pins as well or are they included? and if so what sizes do I need? 


Sorry guys I get the circuits but shopping for this stuff is a real PITA

[tron84]

Pics 2 & 3 can also be found here, I have not seen the 1st pic one to know the size.

http://www.twistywristarcade.com/33-connectors-sockets.

Email him about the 1st pic, he would know for sure.

[PL1]

+1 on Twisty Wrist -- best price by far on SW yoke connectors.   


Scott

[keilmillerjr]

Pics 2 & 3 can also be found here, I have not seen the 1st pic one to know the size.

http://www.twistywristarcade.com/33-connectors-sockets.

Email him about the 1st pic, he would know for sure.

36 pin connector that is cheap... Pimp! 

[tron84]

Pics 2 & 3 can also be found here, I have not seen the 1st pic one to know the size.

http://www.twistywristarcade.com/33-connectors-sockets.

Email him about the 1st pic, he would know for sure.

36 pin connector that is cheap... Pimp! 

YEP     I have got quite a few things from him.  It is Riptor's store from KLOV.

[JohnEDollar]

Pics 2 & 3 can also be found here, I have not seen the 1st pic one to know the size.

http://www.twistywristarcade.com/33-connectors-sockets.

Email him about the 1st pic, he would know for sure.

36 pin connector that is cheap... Pimp! 

YEP     I have got quite a few things from him.  It is Riptor's store from KLOV.

tron84:

Thanks for the "heads up" on twistywristarcade.com!   

Just placed an order for 24-pin, and 12 pin connectors (plus pins).

Prices are hard to beat!   

- John

[tron84]

Pics 2 & 3 can also be found here, I have not seen the 1st pic one to know the size.

http://www.twistywristarcade.com/33-connectors-sockets.

Email him about the 1st pic, he would know for sure.

36 pin connector that is cheap... Pimp! 

YEP     I have got quite a few things from him.  It is Riptor's store from KLOV.

tron84:

Thanks for the "heads up" on twistywristarcade.com!   

Just placed an order for 24-pin, and 12 pin connectors (plus pins).

Prices are hard to beat!   

- John

NP brother 
He has great deals & fast shipping time too.

Jeff

[TopJimmyCooks]

I am worried that this is a molex thread and Nephasth hasn't weighed in.  can someone go over to his place and see if he still fogs a mirror?