mame and display issue?

[pbGames]

Hi,
  I am currently trying to convert an arcade machine into a mame.  I have a dual core pc and running windows xp.  I have a monitor connected to the pc via the motherboards VGA. I have downloaded mame 150 and when I run it from the command prrompt I get the following message.  Is this because I am using the motherboard driver?

C:\MAME>mame
Proposed video mode not supported on device \\.\DISPLAY1

-----------------------------------------------------
Exception at EIP=014782C6 (drawd3d_window_init(win_window_info*)+0x01b6): ACCESS
 VIOLATION
While attempting to read memory at 00000080
-----------------------------------------------------
EAX=00000000 EBX=0029DEC8 ECX=7C91056D EDX=00340000
ESI=77D4C78E EDI=00000001 EBP=05F5FE70 ESP=05F5FE08
-----------------------------------------------------
Stack crawl:
  05F5FE70: 014782C6 (drawd3d_window_init(win_window_info*)+0x01b6)
  05F5FF20: 014516D9 (complete_create(win_window_info*)+0x0269)
  05F5FF80: 01451AD7 (thread_entry(void*)@4+0x0287)
  05F5FFB4: 77C3A3B0 (endthreadex+0x00a9)
  05F5FFEC: 7C80B50B (GetModuleFileNameA+0x01b4)

[pbGames]

Can somebody help out with this?

[Haze]

yes, it looks like DirectX is failing to start up, so either you don't have the current DX installed, or your drivers / video card are inadequate.

this should probably be handled a bit more cleanly in MAME.

[pbGames]

Installing the chipset drivers and direct x has done the trick.

Thanks