Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Wanted: Fix-it Felix Jr cabinet  (Read 1129 times)

0 Members and 1 Guest are viewing this topic.

Nic-93

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10
  • Last login:August 10, 2017, 09:40:14 pm
  • I hope this forum will help me on needed things.
Wanted: Fix-it Felix Jr cabinet
« on: August 29, 2013, 05:40:59 pm »
Im not sure if this would be the right place, but it is sort of wanted.
moveing to a more fitting forum post is welcome.

im looking for someone who i could commission for getting a fix it felix cabinet made,
are anyone interested?, it shall have the traditional arcade monitor and shall have the normal controller layout as on a donkey kong cabinet with 1 and 2 player butten, and functional coin door, and it shall be in the traditional nintendo cabinet with functioning marguee, and its plywood i think it where called, i can fit in the computer myself, i just want the monitor and cabinet done and with a j-pack  for the monitor and controller and coindoor.

I live in denmark.
« Last Edit: August 31, 2013, 02:54:00 pm by Nic-93 »
Logged

Nic-93

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10
  • Last login:August 10, 2017, 09:40:14 pm
  • I hope this forum will help me on needed things.
Re: Wanted: Fix-it Felix Jr cabinet
« Reply #1 on: August 31, 2013, 01:58:40 pm »
Quote from: Nic-93 on August 29, 2013, 05:40:59 pm
Im not sure if this would be the right place, but it is sort of wanted.
moveing to a more fitting forum post is welcome.

im looking for someone who i could commission for getting a fix it felix cabinet made,
are anyone interested?, it shall have the traditional arcade monitor and shall have the normal controller layout as on a donkey kong cabinet with 1 and 2 player butten, and functional coin door, and it shall be in the traditional nintendo cabinet with functioning marguee, and its plywood i think it where called, i can fit in the computer myself, i just want the monitor and cabinet done and with a j-pack  for the monitor and controller and coindoor and side art.
Logged

macattack

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 293
  • Last login:August 03, 2018, 05:35:16 pm
  • Cabinet builder to the stars!
Wanted: Fix-it Felix Jr cabinet
« Reply #2 on: August 31, 2013, 02:12:20 pm »
Where you based?


WWW.Xtremepinball.com
Logged
Pm me for custom cnc needs...

Nic-93

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10
  • Last login:August 10, 2017, 09:40:14 pm
  • I hope this forum will help me on needed things.
Re: Wanted: Fix-it Felix Jr cabinet
« Reply #3 on: August 31, 2013, 02:53:33 pm »
Quote from: macattack on August 31, 2013, 02:12:20 pm
Where you based?


WWW.Xtremepinball.com
i frorgotted to add that, im from denmark,
Logged

macattack

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 293
  • Last login:August 03, 2018, 05:35:16 pm
  • Cabinet builder to the stars!
Wanted: Fix-it Felix Jr cabinet
« Reply #4 on: August 31, 2013, 04:39:51 pm »
Ahh, ok bit far then. Shipping would not be wise. Good luck.
Logged
Pm me for custom cnc needs...

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2792
  • Last login:Yesterday at 08:19:09 pm
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: Wanted: Fix-it Felix Jr cabinet
« Reply #5 on: August 31, 2013, 04:59:59 pm »
Hey Nic-93,

I received your PM. I'm in Canada, and I've been quoted shipping costs around $200 for a standard cabinet inside Canada, so it would be cost prohibitive to ship to Denmark, I'd wager. I'm pretty sure you'll want someone who is closer, probably in the U.K.

Now, what I might recommend is commissioning someone to provide you with a DXF drawing file, which you could then give to a local CNC shop, and have them produce the carved item for you. If you're interested in that, PM me again, and I can quote you a price on the cabinet plans.

Cheers!

Rick
Logged
Pages: [1]
  
Go Up
« previous next »