Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: WANTED: Dynamo HS 1 or HS 2 or a slightly small cab with a horizontal monitor  (Read 1100 times)

0 Members and 1 Guest are viewing this topic.

xSEGAx

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14
  • Last login:March 21, 2015, 04:56:20 pm
  • I own a DK 3,Ms. Pac, Millipede,and Donkey Kong
I was wondering if anyone on the forums had one of those Dynamo HS 1 or HS 2 arcade cabs. Also, if not one of those, I would like a smaller arcade cabinet with a horizontal monitor. (About the size of the Dynamo) and before posting make sure your within atleast 3 hours from Parkersburg, WV.

Thanks in advance!  8)

ohioratrodder

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:May 01, 2016, 05:00:55 pm
  • I want to build my own arcade controls!
I have a nice hs-5 i sell for $50 goggle maps said i am 2hrs and 55mins form Parkersburg, WV. I live in midland, oh 45148

xSEGAx

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14
  • Last login:March 21, 2015, 04:56:20 pm
  • I own a DK 3,Ms. Pac, Millipede,and Donkey Kong
I may be interested in it. Would you mind putting a picture up? What does the cabinet have in it?

Thanks in advance! ;)

BadMouth

  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9272
  • Last login:July 31, 2025, 06:57:41 am
  • ...
A bit farther than you wanted to travel, but coinop warehouse  in Hagerstown, MD always has them for just under $100.
Monitors usually aren't working.  I'd hold out for one with a coin door or else you'll end up with too much in it.
Some of their stuff is listed on ebay.

ohioratrodder

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:May 01, 2016, 05:00:55 pm
  • I want to build my own arcade controls!
I get some pictures tonight