Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: ROWE-AMI r 1-4  (Read 1709 times)

0 Members and 1 Guest are viewing this topic.

ncassway

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:September 11, 2013, 06:40:34 pm
  • rowe-ami r1-4
ROWE-AMI r 1-4
« on: August 26, 2013, 05:16:31 pm »
Hi
I have a rowe-ami r 1-4, for the most part it works really well, but the lower half of the keypad does not work, I cannot use the numbers 6, 7 8, 9, 0.
Could this be an issue with the CCC, I looked at the board and noted some significant corrosion from the battery.
Thanks in advance for any advice.

Nick
Philadelphia, PA USA

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1085
  • Last login:July 19, 2020, 01:22:45 pm
Re: ROWE-AMI r 1-4
« Reply #1 on: August 27, 2013, 07:04:24 am »
Hello Nick,

Welcome to the forum.

Have you checked the Pricing board for dry joints (cold joints USA) on the top and bottom connectors.

The CCC could be the issue and other than checking dry joints to the connection pins the CCC needs to be checked by a Rowe Ami engineer, I suggest that you send your board to Bruce Wentworth at AB leisure being as he is on your side of the pond.

Regards
Alan

Alan Hood
ami-man
UK