Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Atari Yoke (Star Wars) Plug Wiring Diagram  (Read 1538 times)

0 Members and 1 Guest are viewing this topic.

kaptaink_cg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 28
  • Last login:January 24, 2015, 05:37:11 pm
  • I want to build my own arcade controls!
Atari Yoke (Star Wars) Plug Wiring Diagram
« on: August 17, 2013, 02:03:32 am »
I recently purchased an Atari Star Wars yoke and hooked it up to a U-HID controller.  I wanted to keep the yoke as original as possible, so I found the appropriate molex plug and wired the U-HID into that.  At the time I wasn't able to find any wiring diagrams for the yoke plug, so I created one for others to use.  Attached below!
Logged

italiandoh

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:June 10, 2024, 04:05:24 pm
  • Lead on adventurer, your quest awaits!
    • The italian Dukes of Hazzard website
Re: Atari Yoke (Star Wars) Plug Wiring Diagram
« Reply #1 on: August 17, 2013, 09:54:44 am »
Cool, thanks for sharing it  :cheers:
Logged

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9678
  • Last login:Today at 03:31:03 am
  • Designated spam hunter
Re: Atari Yoke (Star Wars) Plug Wiring Diagram
« Reply #2 on: August 17, 2013, 12:39:59 pm »
Ninten-doh posted a version here.

Based on an observation by Gray_Area, I updated the image to indicate X and Y axis.



Also, If you are using the :angry: RAM Controls USB adapter, the triggers and buttons are as follows:

Pin 1 = HID Button 1
Pin 2 = HID Button 4
Pin 3 = HID Button 3
Pin 4 = HID Button 2

Twisty Wrist has the best price on the connectors that I've found.


Scott
« Last Edit: August 17, 2013, 12:45:29 pm by PL1 »
Logged
Pages: [1]
  
Go Up
« previous next »