Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: It's done! Back to its former glory! Undoing a bad conversion  (Read 798 times)

0 Members and 1 Guest are viewing this topic.

nagamitsu

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 61
  • Last login:July 10, 2014, 08:45:25 pm
  • I want to build my own arcade controls!
All I need now, having back panel door cut properly (with vents), the plastic trim at front bottom of kick panel could use replacing (not sure where to find something close to this), and maybe some graphics for control panel overlay. Oh, and of course waiting patiently for Openjamma board to be available/made.  ;D

Here's how I got it:



Here's its current state:



And the custom vinyl underlay for the monitor glass, with horizontal orientation:


paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10994
  • Last login:July 06, 2024, 08:43:49 pm
  • Awesome face!
Re: It's done! Back to its former glory! Undoing a bad conversion
« Reply #1 on: July 05, 2013, 11:09:47 am »
Go to the big box hardware store and you should be able to find something that approximates the trim on the kickplate. It won't be identical though. I have a spare piece of it leftover from my Cabal restoration that I didn't use it on (it was in a Midway cabinet), but a new one would look nicer.
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.