Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Rowe AMI Jukebox (45's) no sound on one side and static sound  (Read 1334 times)

0 Members and 1 Guest are viewing this topic.

Aaron McPeak

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:May 30, 2013, 02:39:58 pm
  • I want to build my own arcade controls!
I have an early 80's Rowe R-90 that (1) has no sound on one side and (2) starts off sounding good but after 10-15 plays will start to have a lot of static.  The two issues may be unrelated but they exist so thought I would disclose them.  I have seen on several other posts related to sound that you should remove and reattach all of the connectors and have done so.  Still no sound on one side.  I have pictures of the amp and related but just don't know where to start.  Any thoughts or ideas?  I can be emailed at amcpeak@yahoo.com.

WindDrake

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 271
  • Last login:December 03, 2020, 09:49:05 pm
  • Electrical Engineer
Re: Rowe AMI Jukebox (45's) no sound on one side and static sound
« Reply #1 on: May 30, 2013, 04:23:09 pm »
You might want to check out the KLOV forums for Juke help. There's a whole section dedicated to that, and there's some great resources over there.