Author Topic: Bartop Arcade Flatpacks Vertical or Horizontal US/MI/Oxford (Read 37244 times)

HaRuMaN · « **Reply #80 on:** October 24, 2013, 02:13:09 pm »

Quote from: macattack on October 24, 2013, 12:29:56 pm

looking good Eric.

Now if as Vendors we could all get sticky topics

You get a sticky, you get a sticky, everybody gets a sticky! (Except for Rick, since he still doesn't have wood)

Rick · « **Reply #81 on:** October 24, 2013, 02:35:20 pm »

Quote from: HaRuMaN on October 24, 2013, 02:13:09 pm

You get a sticky, you get a sticky, everybody gets a sticky! (Except for Rick, since he still doesn't have wood)

HaRuMaN · « **Reply #82 on:** October 24, 2013, 02:36:54 pm »

Quote from: Rick on October 24, 2013, 02:35:20 pm

Quote from: HaRuMaN on October 24, 2013, 02:13:09 pm
You get a sticky, you get a sticky, everybody gets a sticky! (Except for Rick, since he still doesn't have wood)

Hey, and I didn't even have to change your post for that!

macattack · « **Reply #83 on:** October 24, 2013, 03:05:41 pm »

maybe we should start Rick off with some soft wood!!!

anyone got any balsa we can send over

Rick · « **Reply #84 on:** October 24, 2013, 03:21:49 pm »

Quote from: macattack on October 24, 2013, 03:05:41 pm

maybe we should start Rick off with some soft wood!!! anyone got any balsa we can send over

Ohhhhh, you guys are - so - gonna get yours.

Quote

Mongol General: Conan! What is best in life?
Conan: To crush your enemies, see them driven before you, and to hear the lamentation of their women.

yotsuya · « **Reply #85 on:** October 24, 2013, 03:27:09 pm »

I'll imagine there's a sticky there for the imaginary cabs.

ebarlow99 · « **Reply #86 on:** October 25, 2013, 08:33:49 am »

cabs for sale

cnhartwel · « **Reply #87 on:** October 27, 2013, 09:10:05 pm »

still doing custom panels?

mann0mann · « **Reply #88 on:** October 28, 2013, 02:28:27 am »

Are both those cabs specifically for sale? Or just an example of your kits?

ebarlow99 · « **Reply #89 on:** November 20, 2013, 02:45:11 pm »

those are sold cabs!

AmericanDemon · « **Reply #90 on:** December 16, 2013, 10:15:36 pm »

Sent you a pm.

ebarlow99 · « **Reply #91 on:** December 18, 2013, 10:23:50 am »

got it! I love your idea let's do it!!!

Hagarr · « **Reply #92 on:** January 02, 2014, 05:08:56 pm »

nice work

ebarlow99 · « **Reply #93 on:** January 03, 2014, 03:00:50 pm »

Quote from: Hagarr on January 02, 2014, 05:08:56 pm

nice work

thanks!!

ebarlow99 · « **Reply #94 on:** January 22, 2014, 08:18:18 am »

finished customers cocktail table...1st one not too bad!!

pbj · « **Reply #95 on:** January 22, 2014, 09:22:07 am »

No price? No link to purchase? No point?

ebarlow99 · « **Reply #96 on:** January 22, 2014, 11:14:20 am »

lol......I knew someone would bash it...... don't be mad you have no skills dude!!

pbj · « **Reply #97 on:** January 22, 2014, 11:49:28 am »

The cabinet looks fine. I just don't understand why you're advertising things you aren't selling.

ebarlow99 · « **Reply #98 on:** January 22, 2014, 12:19:56 pm »

just giving a peek what's on the horizon! im sure if someone wanted one they would contact me

yotsuya · « **Reply #99 on:** January 22, 2014, 02:49:55 pm »

Jim just wants to know where the tires are so he can kick them.

ebarlow99 · « **Reply #100 on:** January 22, 2014, 03:12:08 pm »

flat as usual!

pbj · « **Reply #101 on:** January 22, 2014, 03:21:15 pm »

Who's Jim? He sounds cool.

yotsuya · « **Reply #102 on:** January 22, 2014, 03:30:37 pm »

Quote from: pbj on January 22, 2014, 03:21:15 pm

Who's Jim? He sounds cool.

James kthxbye.

ebarlow99 · « **Reply #103 on:** February 25, 2014, 04:17:34 pm »

New Custom Bartop Cocktail Flatpacks

Made from 5/8 Baltic birch

monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking

$185 plus shipping

US / CA only

mvolke1 · « **Reply #104 on:** March 14, 2014, 07:33:26 pm »

Quote from: ebarlow99 on January 22, 2014, 08:18:18 am

finished customers cocktail table...1st one not too bad!!

Hey Eric, can't wait to get mine. That cocktail cab reminds me of mine.

mvolke1 · « **Reply #105 on:** March 14, 2014, 07:34:43 pm »

This is my cocktail… soon to be converted to a bar top.

ebarlow99 · « **Reply #106 on:** April 07, 2014, 02:48:05 pm »

nice Matt!!

rablack97 · « **Reply #107 on:** April 07, 2014, 02:56:20 pm »

Quote from: ebarlow99 on February 25, 2014, 04:17:34 pm

New Custom Bartop Cocktail Flatpacks

Made from 5/8 Baltic birch

monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking

$185 plus shipping

US / CA only

You naming that one the Maximus Special, you are giving him cred aren't you man?

ebarlow99 · « **Reply #108 on:** April 07, 2014, 02:58:25 pm »

ahh nope......thanks dude for putting up your design so everyone can make one....

Quote from: rablack97 on April 07, 2014, 02:56:20 pm

Quote from: ebarlow99 on February 25, 2014, 04:17:34 pm
New Custom Bartop Cocktail Flatpacks

Made from 5/8 Baltic birch

monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking

$185 plus shipping

US / CA only

You naming that one the Maximus Special, you are giving him cred aren't you man?

rablack97 · « **Reply #109 on:** April 07, 2014, 03:04:08 pm »

Man that's cold blooded, but fair enough.

Degenatrons open sourced his bartop designs and Haruman used his design but at least gave him Cred man.

Just saying if your gonna make money off someone elses work at least give a shout out....

ebarlow99 · « **Reply #110 on:** April 07, 2014, 03:09:00 pm »

dude........

I did not get his design from here nor another site......someone sent it to me and wanted one....so I cut one for them and they said I could keep the file....my bad!!!

Maximus THANK YOU, THANK YOU , THANK YOU if this is your design.....

FYI.....I changed the design alot to fit my needs.....

If I designed something and didn't want people to have it I would not have posted it for everyone to grab and make on there own..

so again thanks dude!

Malenko · « **Reply #111 on:** April 07, 2014, 03:16:55 pm »

Quote from: ebarlow99 on April 07, 2014, 03:09:00 pm

dude........

I did not get his design from here nor another site......someone sent it to me and wanted one....so I cut one for them and they said I could keep the file....my bad!!!

Maximus THANK YOU, THANK YOU , THANK YOU if this is your design.....

FYI.....I changed the design alot to fit my needs.....

If I designed something and didn't want people to have it I would not have posted it for everyone to grab and make on there own..

so again thanks dude!

now that you know its his design, you might wanna ask permission n stuff. Good Karma and all that jazz.

ebarlow99 · « **Reply #112 on:** April 07, 2014, 03:19:34 pm »

ah permission for what?

im not asking for anything

Maximus · « **Reply #113 on:** April 07, 2014, 03:42:32 pm »

eBarlow99 and I have spoken about this, there's no problems here.

rablack97 · « **Reply #114 on:** April 07, 2014, 04:28:13 pm »

Well man, just do things right and in the right order.

Apparently you did get permission from Maximus, not sure prior or just now I dunno. It's just a professional sign-off.

All sellers on here get hell from someone for some reason, so its just part of it. You aren't the first that's gotten lit up over something like this, so no one was picking on you.

Its just preserving the future will for people to keep posting their plans for our use and or benefit, and you gain honesty points with your buyers.

No one wanted to mass produce these, you picked up on it, cool, i'm sure folks will appreciate it. Just let it be known the originator gave his blessing and all will be well, trust me i'd be on someone elses case had they stole something from you and tried to make money off it without your permission...

Anyhow......we are all here to help dont get so offended so easily......

ebarlow99 · « **Reply #115 on:** April 08, 2014, 12:17:58 pm »

still got cabs for sale

skeester · « **Reply #116 on:** June 11, 2014, 08:51:28 pm »

I want one of those Golden Tee Pedestals. How do I get one? I got a Power Putt, Silver Strike, Bags and a 6 in 1 Jamma....nuff said.

Sarver Systems · « **Reply #117 on:** August 05, 2014, 01:53:11 pm »

Quote from: ebarlow99 on February 25, 2014, 04:17:34 pm

New Custom Bartop Cocktail Flatpacks

Made from 5/8 Baltic birch

monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking

$185 plus shipping

US / CA only

Do you have any more pics of this unit? I'd like to see some inside pics so I can see how everything mounts.

Also, how heavy is it when it's complete?

whatzcrackn · « **Reply #118 on:** August 15, 2014, 01:06:30 pm »

Can you make it with seven buttons (Neogeo style). Ie six w/ one to the left off set?

quote author=ebarlow99 link=topic=131643.msg1424631#msg1424631 date=1393363054]
New Custom Bartop Cocktail Flatpacks

Made from 5/8 Baltic birch

monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking

$185 plus shipping

US / CA only
[/quote]

PL1 · « **Reply #119 on:** September 18, 2014, 10:01:28 am »

Quote from: Rick on September 17, 2014, 10:25:57 pm

Eric asked me to convey his apologies - again - and is very concerned about his reputation. He didn't leave BYOAC to be shady, or any other reason other than the negativity that we all seem to get at one time or another... I, for one, have never had issue with the guy, and wish him well. I'm happy to hear that the troubles that created the necessity for this thread have been rectified.

I'm locking this thread not because Eric has done anything wrong but to keep people from wasting their time trying to contact him here instead of at one of these locations:

* His website here

* "ebarlow99" at Bartopmania

* "bartop-arcades" at KLOV

* "ebarlow99" at Hyperspin forums

If he ever decides to re-join the BYOAC community, we will gladly unlock this thread for him.

Scott


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news