Author Topic: Bartop Arcade Flatpacks Vertical or Horizontal US/MI/Oxford (Read 37069 times)

ebarlow99 · « **on:** April 09, 2013, 12:55:03 pm »

BARTOP ARCADE FLATPACKS 1 & 2 Player Vertical or Horizontal Screen
Sides made from 3/4 birch
All other pieces 1/2 birch
NO PARTICLE BOARD!!!!!!
Location: Oxford, MI Can be picked up locally!

Create your own Bartop arcade with this nice flatpack (you build)...come with wood only! These units are real nice and needs to be put together, sanded, primed and painted! You supply all other hardware, (buttons, joysticks, etc.)
For Vertical or Horizontal Screen placement...just need to know the time of order!!
All cabs are lasered for precise precision cuts! Can laser your name on cab!

Includes:T-molding slots, T-nuts and bolts for CP, step by step instructions!

Kit assembles in 10 minutes

All are made to order. Paypal and credit cards accepted

Control panel can be custom to your liking. Any questions just ask!! 1 Player units.....I have 2 player just ask!

Control panel cut to your liking!!!!

1 player Fits a 17" or 19" monitor either horizontal to vertical.....can be set either way!
2 player Fits a 19" widescreen monitor horizontal only

Dimensions are roughly

1 player 18.5" Width x 18" deep X 27 1/2" height
2 player 24" Width x 18" deep X 27 1/2" height

In the works....full size cabs, 2 player,pedestals and cocktail tables!!!!

1 player $175 shipped to US...will figure out shipping (NOT Included)
2 player $260 shipped to US...will figure out shipping (NOT Included)

ebarlow99 · « **Reply #1 on:** April 11, 2013, 01:43:01 pm »

I will sweeten the pot......every 5th person to order one will receive a FREE 1 player bartop flatpack shipping not included

This will be done on honor system! I am fair and honest!!!!

US or Canada only!

Gray_Area · « **Reply #2 on:** April 11, 2013, 07:50:45 pm »

Uhmmmm. Looks killer. I'll PM you to discuss a full cab design. Since you're new, pictures may not be enough for a little while. You might want to post in some other places and talk about other things in the hobby.

gonzojoey · « **Reply #3 on:** April 11, 2013, 09:02:41 pm »

I think I might bite...
PM sent for some more details.

404 · « **Reply #4 on:** April 12, 2013, 05:21:25 pm »

amazing, just the design i was looking for! Wish i wasn't neck deep in bills right now, i would take the chance and buy one then vouch for you if all went well.

good luck with your sales.

ebarlow99 · « **Reply #5 on:** April 13, 2013, 03:02:54 pm »

thanks for the kind words!

SNAAKE · « **Reply #6 on:** April 13, 2013, 04:28:44 pm »

can you make it wider to fit the asus 23" monitor?

I was really hoping to get one from haruman but in case he isn't taking orders any time soon, I can get one from you and start working on things

ebarlow99 · « **Reply #7 on:** April 14, 2013, 08:31:31 am »

23" is really big....the cab would be too wide....the 2 player cabs are about 24 wide all together and that houses a 19" widescreen...so a 23" screen would be too big.

northerngames · « **Reply #8 on:** April 15, 2013, 02:48:09 pm »

is there a price difference for local pickup?

ebarlow99 · « **Reply #9 on:** April 15, 2013, 03:09:50 pm »

sure $30 off

Garvv · « **Reply #10 on:** April 16, 2013, 06:40:58 pm »

Looks nice, I am also interested, particularly if I can purchase a few blank CP boards along with the regular kit.

ebarlow99 · « **Reply #11 on:** April 16, 2013, 08:21:38 pm »

Absolutely! Whatever you need.....

404 · « **Reply #12 on:** April 17, 2013, 10:27:11 am »

Quote from: ebarlow99 on April 14, 2013, 08:31:31 am

23" is really big....the cab would be too wide....the 2 player cabs are about 24 wide all together and that houses a 19" widescreen...so a 23" screen would be too big.

You should reconsider or at least look into making another design compatible with a 23inch widescreen. There are lots of street fighter fans that use an asus 23" monitor for street fighter 4 gaming. I'm sure they would be interested in having a 2 player, 8 button bartop to play on. Maybe you can check out the shoryuken forums at http://forums.shoryuken.com/ and see if there is any interest in one.

If there is a lot of interest, i would gladly accept one as a finders fee.

ebarlow99 · « **Reply #13 on:** April 17, 2013, 10:50:22 am »

lol! I am actually got a prototype 2 player cab designed and cut.....right now the cab is 24" assembled and houses a 19" monitor......if I had to house a 23" monitor it would be too wide for a bartop in my opinion...but I could be wrong

404 · « **Reply #14 on:** April 17, 2013, 11:34:52 am »

Quote from: ebarlow99 on April 17, 2013, 10:50:22 am

lol! I am actually got a prototype 2 player cab designed and cut.....right now the cab is 24" assembled and houses a 19" monitor......if I had to house a 23" monitor it would be too wide for a bartop in my opinion...but I could be wrong

It's your choice really. Just suggesting where there would be some business for you, that's all.

ebarlow99 · « **Reply #15 on:** April 17, 2013, 11:40:05 am »

I posted already....thank you!

I will remember the "finders fee"

ebarlow99 · « **Reply #16 on:** April 17, 2013, 02:20:56 pm »

http://forums.shoryuken.com
have to wait 6 months to post....very dumb cancelled my account

404 · « **Reply #17 on:** April 17, 2013, 04:38:28 pm »

Quote from: ebarlow99 on April 17, 2013, 02:20:56 pm

http://forums.shoryuken.com
have to wait 6 months to post....very dumb cancelled my account

well you tried.

I was just joking about the finders fee anyway. just think you have a really cool, different design and you should be able to spread the word out there.

edit: maybe it's time to think about doing something more site neutral, like your own website. Just a thought.

ebarlow99 · « **Reply #18 on:** April 17, 2013, 06:18:04 pm »

in the works! great minds think a :burgerking:like!!!

ebarlow99 · « **Reply #19 on:** April 22, 2013, 09:48:34 pm »

ebarlow99 · « **Reply #20 on:** April 24, 2013, 06:01:42 am »

Some more pics...for member Gonzojoey!!
Primed

gonzojoey · « **Reply #21 on:** April 26, 2013, 12:01:59 am »

Looks great, man! I can't wait to get started on this project. Thanks!

retrostark · « **Reply #22 on:** April 26, 2013, 06:37:30 am »

great work so far. i am getting ready to do the same thing after my schedule frees up a bit. you have far prices, and the laser cut is a big deal to. are you only doing pickup? or are you going to ship to?

ebarlow99 · « **Reply #23 on:** April 26, 2013, 08:57:21 am »

thanks...it's nice having access to a laser

yes I ship also! can also do custom control panels (2 - 4 player w/trackball etc..)
Have 2 player cab prototype done just need to build.
Working on pedestal flat pack now!

HaRuMaN · « **Reply #24 on:** April 26, 2013, 04:24:15 pm »

Lol. Cleaned this thread up a bit to get it back on track.

Carry on.

Malenko · « **Reply #25 on:** April 26, 2013, 04:26:58 pm »

Quote from: HaRuMaN on April 26, 2013, 04:24:15 pm

Lol. Cleaned this thread up a bit to get it back on track.

Carry on.

Yeah, at MY request , n00b

To recap now gone info: These kits come with horizontal or vertical bezels and can fit a probably fit a 19" horizontally. Malenko doesn't like birch for backdoors on Galaga cabs.

ebarlow99 · « **Reply #26 on:** April 27, 2013, 10:51:19 am »

2 player flatpacks available!

ebarlow99 · « **Reply #27 on:** April 29, 2013, 11:27:41 am »

more pics

ebarlow99 · « **Reply #28 on:** April 29, 2013, 11:29:21 am »

gonzojoey · « **Reply #29 on:** April 29, 2013, 09:02:58 pm »

Got mine in the mail!

Talk about being well packaged! WOW.
Here are some "unboxing" pics

I should be starting this project very soon. I'll be sure to start a Project thread to track my progress.
Thanks EBarlow99!

gonzojoey · « **Reply #30 on:** April 29, 2013, 09:05:00 pm »

A few more...

ebarlow99 · « **Reply #31 on:** April 29, 2013, 10:32:47 pm »

Awesome! glad you liked it...let me know if you need anything!!!! Can't wait to see what you do with it!

BoLt · « **Reply #32 on:** April 30, 2013, 11:02:31 am »

PM'd you some questions

ebarlow99 · « **Reply #33 on:** April 30, 2013, 11:29:56 am »

got em!

ebarlow99 · « **Reply #34 on:** April 30, 2013, 01:07:27 pm »

1 and 2 player cabs on the site www.xtremepinball.com
Look for Manufacturer "Bartop Arcades" for listings

ebarlow99 · « **Reply #35 on:** May 02, 2013, 05:32:48 am »

NOW doing custom control panels!!! PM me for info

lowgunn · « **Reply #36 on:** May 03, 2013, 11:10:53 am »

Can you cut the plexi for the CP panel too?

ebarlow99 · « **Reply #37 on:** May 03, 2013, 01:02:29 pm »

Quote from: lowgunn on May 03, 2013, 11:10:53 am

Can you cut the plexi for the CP panel too?

Absolutely!!

gonzojoey · « **Reply #38 on:** May 04, 2013, 02:18:41 pm »

I finally assembled my cabinet and it was super easy. Actually, too easy...it only took about 15 min once I had all my tools together and my work table cleaned off. Getting ready for the build took longer than the actual build

.
Thanks ebarlow99!

ebarlow99 · « **Reply #39 on:** May 04, 2013, 02:26:16 pm »

cool! can' t wait to see what you do with it! thanks a lot!!!!

ebarlow99 · « **Reply #40 on:** May 06, 2013, 02:02:07 pm »

Malenko · « **Reply #41 on:** May 06, 2013, 02:32:22 pm »

you can not link to a website that sells 60 in 1 boards.

ebarlow99 · « **Reply #42 on:** May 06, 2013, 02:33:08 pm »

really? my bad..edited

gonzojoey · « **Reply #43 on:** May 07, 2013, 01:12:52 am »

Just a quick plug for ebarlow99's Bartops..
Mine is coming along great and I couldn't be happier.
Here's a pic of mine so far..
Thanks man!

ebarlow99 · « **Reply #44 on:** May 07, 2013, 03:42:54 pm »

sweet! looks good and glad you liked it!

ebarlow99 · « **Reply #45 on:** May 13, 2013, 11:10:12 am »

2 player cabs with red t-molding

ebarlow99 · « **Reply #46 on:** May 13, 2013, 11:28:06 am »

1 player flatpack

Anpanman · « **Reply #47 on:** May 15, 2013, 11:43:58 am »

Definitely need one of those 1-player bartops. PM Sent.

ebarlow99 · « **Reply #48 on:** May 15, 2013, 03:51:38 pm »

i got it! thanks for the order!!!

ebarlow99 · « **Reply #49 on:** May 16, 2013, 09:39:07 am »

finished up a custom control panel with plexi for a customer last night!

ebarlow99 · « **Reply #50 on:** May 16, 2013, 11:42:51 am »

up next for flatpacks.... Golden Tee pedestal!

lordnacho · « **Reply #51 on:** May 17, 2013, 02:32:13 pm »

Quote from: ebarlow99 on May 16, 2013, 11:42:51 am

up next for flatpacks.... Golden Tee pedestal!

Intrigued

ebarlow99 · « **Reply #52 on:** May 17, 2013, 02:54:05 pm »

Quote from: lordnacho on May 17, 2013, 02:32:13 pm

Quote from: ebarlow99 on May 16, 2013, 11:42:51 am
up next for flatpacks.... Golden Tee pedestal!
Intrigued

me too! gonna be fun!

ebarlow99 · « **Reply #53 on:** May 20, 2013, 02:43:51 pm »

Vertical flatpacks now available!!!! inquire within

ebarlow99 · « **Reply #54 on:** May 20, 2013, 02:54:48 pm »

picture of vertical cab...pic is a 17" can also do a 15 or 19"

ebarlow99 · « **Reply #55 on:** May 23, 2013, 03:05:52 pm »

just purchased a 4' x 8' cnc router! Time to get serious!

AGarv · « **Reply #56 on:** May 23, 2013, 10:10:23 pm »

Nice, are you considering a full size, slim upright cab?

ebarlow99 · « **Reply #57 on:** May 24, 2013, 06:49:43 am »

Yes! I will be doing full size cabs soon! Just ordered my 4' x 8' CNC router!

ebarlow99 · « **Reply #58 on:** May 27, 2013, 08:21:40 am »

DK cab started for customer

ebarlow99 · « **Reply #59 on:** May 27, 2013, 08:23:13 am »

Front pcs

ebarlow99 · « **Reply #60 on:** May 29, 2013, 12:57:17 pm »

2 player horizontal now in stock!!
1 player vertical or horizontal also!!!

Coming soon!
Golden Tee pedestals
Mini or full size cocktail table
Viewlix
Full size (any cab)

saint · « **Reply #61 on:** June 06, 2013, 09:31:03 pm »

Clear!

*Thump!*

Thread restored!

Gray_Area · « **Reply #62 on:** June 07, 2013, 09:07:47 pm »

Quote from: saint on June 06, 2013, 09:31:03 pm

Clear!

*Thump!*

Thread restored!

---steaming pile of meadow muffin---, what could've happened?

ebarlow99 · « **Reply #63 on:** June 08, 2013, 08:33:25 am »

Start n ruin your own thread

Geez. Grow up

lowgunn · « **Reply #64 on:** June 08, 2013, 11:08:28 pm »

Your making a viewlix? Excited please take images when your done please!

Btw how much do you think it will cost.

ebarlow99 · « **Reply #65 on:** June 16, 2013, 07:52:29 am »

Custom TMNT CP with added trackball and got rid of 3&4 player....
Matching lexan on top!

jpS14 · « **Reply #66 on:** June 24, 2013, 03:28:03 pm »

how much do these custom panels run?

ebarlow99 · « **Reply #67 on:** June 24, 2013, 03:51:39 pm »

depends on size and how intricate cuts are.....pm sent

ebarlow99 · « **Reply #68 on:** July 09, 2013, 11:32:52 am »

new 2 player cab for a customer!

ebarlow99 · « **Reply #69 on:** July 15, 2013, 12:28:07 pm »

few more thing left then done!!!!

jmike · « **Reply #70 on:** July 15, 2013, 12:58:14 pm »

Love the look of those Control Panels (especially the art)

Well done sir!

ebarlow99 · « **Reply #71 on:** July 15, 2013, 02:35:13 pm »

Quote from: jmike on July 15, 2013, 12:58:14 pm

Love the look of those Control Panels (especially the art)

Well done sir!

thanks a lot! came out nice!

ebarlow99 · « **Reply #72 on:** August 06, 2013, 03:29:58 pm »

prototype done!!! flatpacks to follow

Rick · « **Reply #73 on:** August 06, 2013, 04:19:26 pm »

Quote from: ebarlow99 on August 06, 2013, 03:29:58 pm

prototype done!!! flatpacks to follow

In a world where flatscreen TV's abound... ONE MAN was building Golden Tee-styled cabinets for mass consumption... /DonLafontaine

Looks sweet, dude!

DGP · « **Reply #74 on:** August 13, 2013, 03:25:08 am »

macattack · « **Reply #75 on:** August 13, 2013, 06:50:02 am »

Quote from: ebarlow99 on August 06, 2013, 03:29:58 pm

prototype done!!! flatpacks to follow

Lol, that's looks familiar

have you managed to get it up and running since you came over and collected it?

ebarlow99 · « **Reply #76 on:** August 13, 2013, 08:53:01 am »

too much crap going on...can barely keep my head above waters

ebarlow99 · « **Reply #77 on:** October 24, 2013, 12:03:36 pm »

Full size replicas are now available!!!

macattack · « **Reply #78 on:** October 24, 2013, 12:29:56 pm »

looking good Eric.

Now if as Vendors we could all get sticky topics

Malenko · « **Reply #79 on:** October 24, 2013, 01:53:30 pm »

Quote from: macattack on October 24, 2013, 12:29:56 pm

looking good Eric.

Now if as Vendors we could all get sticky topics

Have you tried PMing saint or Haruman for a sticky?

HaRuMaN · « **Reply #80 on:** October 24, 2013, 02:13:09 pm »

Quote from: macattack on October 24, 2013, 12:29:56 pm

looking good Eric.

Now if as Vendors we could all get sticky topics

You get a sticky, you get a sticky, everybody gets a sticky! (Except for Rick, since he still doesn't have wood)

Rick · « **Reply #81 on:** October 24, 2013, 02:35:20 pm »

Quote from: HaRuMaN on October 24, 2013, 02:13:09 pm

You get a sticky, you get a sticky, everybody gets a sticky! (Except for Rick, since he still doesn't have wood)

HaRuMaN · « **Reply #82 on:** October 24, 2013, 02:36:54 pm »

Quote from: Rick on October 24, 2013, 02:35:20 pm

Quote from: HaRuMaN on October 24, 2013, 02:13:09 pm
You get a sticky, you get a sticky, everybody gets a sticky! (Except for Rick, since he still doesn't have wood)

Hey, and I didn't even have to change your post for that!

macattack · « **Reply #83 on:** October 24, 2013, 03:05:41 pm »

maybe we should start Rick off with some soft wood!!!

anyone got any balsa we can send over

Rick · « **Reply #84 on:** October 24, 2013, 03:21:49 pm »

Quote from: macattack on October 24, 2013, 03:05:41 pm

maybe we should start Rick off with some soft wood!!! anyone got any balsa we can send over

Ohhhhh, you guys are - so - gonna get yours.

Quote

Mongol General: Conan! What is best in life?
Conan: To crush your enemies, see them driven before you, and to hear the lamentation of their women.

yotsuya · « **Reply #85 on:** October 24, 2013, 03:27:09 pm »

I'll imagine there's a sticky there for the imaginary cabs.

ebarlow99 · « **Reply #86 on:** October 25, 2013, 08:33:49 am »

cabs for sale

cnhartwel · « **Reply #87 on:** October 27, 2013, 09:10:05 pm »

still doing custom panels?

mann0mann · « **Reply #88 on:** October 28, 2013, 02:28:27 am »

Are both those cabs specifically for sale? Or just an example of your kits?

ebarlow99 · « **Reply #89 on:** November 20, 2013, 02:45:11 pm »

those are sold cabs!

AmericanDemon · « **Reply #90 on:** December 16, 2013, 10:15:36 pm »

Sent you a pm.

ebarlow99 · « **Reply #91 on:** December 18, 2013, 10:23:50 am »

got it! I love your idea let's do it!!!

Hagarr · « **Reply #92 on:** January 02, 2014, 05:08:56 pm »

nice work

ebarlow99 · « **Reply #93 on:** January 03, 2014, 03:00:50 pm »

Quote from: Hagarr on January 02, 2014, 05:08:56 pm

nice work

thanks!!

ebarlow99 · « **Reply #94 on:** January 22, 2014, 08:18:18 am »

finished customers cocktail table...1st one not too bad!!

pbj · « **Reply #95 on:** January 22, 2014, 09:22:07 am »

No price? No link to purchase? No point?

ebarlow99 · « **Reply #96 on:** January 22, 2014, 11:14:20 am »

lol......I knew someone would bash it...... don't be mad you have no skills dude!!

pbj · « **Reply #97 on:** January 22, 2014, 11:49:28 am »

The cabinet looks fine. I just don't understand why you're advertising things you aren't selling.

ebarlow99 · « **Reply #98 on:** January 22, 2014, 12:19:56 pm »

just giving a peek what's on the horizon! im sure if someone wanted one they would contact me

yotsuya · « **Reply #99 on:** January 22, 2014, 02:49:55 pm »

Jim just wants to know where the tires are so he can kick them.

ebarlow99 · « **Reply #100 on:** January 22, 2014, 03:12:08 pm »

flat as usual!

pbj · « **Reply #101 on:** January 22, 2014, 03:21:15 pm »

Who's Jim? He sounds cool.

yotsuya · « **Reply #102 on:** January 22, 2014, 03:30:37 pm »

Quote from: pbj on January 22, 2014, 03:21:15 pm

Who's Jim? He sounds cool.

James kthxbye.

ebarlow99 · « **Reply #103 on:** February 25, 2014, 04:17:34 pm »

New Custom Bartop Cocktail Flatpacks

Made from 5/8 Baltic birch

monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking

$185 plus shipping

US / CA only

mvolke1 · « **Reply #104 on:** March 14, 2014, 07:33:26 pm »

Quote from: ebarlow99 on January 22, 2014, 08:18:18 am

finished customers cocktail table...1st one not too bad!!

Hey Eric, can't wait to get mine. That cocktail cab reminds me of mine.

mvolke1 · « **Reply #105 on:** March 14, 2014, 07:34:43 pm »

This is my cocktail… soon to be converted to a bar top.

ebarlow99 · « **Reply #106 on:** April 07, 2014, 02:48:05 pm »

nice Matt!!

rablack97 · « **Reply #107 on:** April 07, 2014, 02:56:20 pm »

Quote from: ebarlow99 on February 25, 2014, 04:17:34 pm

New Custom Bartop Cocktail Flatpacks

Made from 5/8 Baltic birch

monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking

$185 plus shipping

US / CA only

You naming that one the Maximus Special, you are giving him cred aren't you man?

ebarlow99 · « **Reply #108 on:** April 07, 2014, 02:58:25 pm »

ahh nope......thanks dude for putting up your design so everyone can make one....

Quote from: rablack97 on April 07, 2014, 02:56:20 pm

Quote from: ebarlow99 on February 25, 2014, 04:17:34 pm
New Custom Bartop Cocktail Flatpacks

Made from 5/8 Baltic birch

monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking

$185 plus shipping

US / CA only

You naming that one the Maximus Special, you are giving him cred aren't you man?

rablack97 · « **Reply #109 on:** April 07, 2014, 03:04:08 pm »

Man that's cold blooded, but fair enough.

Degenatrons open sourced his bartop designs and Haruman used his design but at least gave him Cred man.

Just saying if your gonna make money off someone elses work at least give a shout out....

ebarlow99 · « **Reply #110 on:** April 07, 2014, 03:09:00 pm »

dude........

I did not get his design from here nor another site......someone sent it to me and wanted one....so I cut one for them and they said I could keep the file....my bad!!!

Maximus THANK YOU, THANK YOU , THANK YOU if this is your design.....

FYI.....I changed the design alot to fit my needs.....

If I designed something and didn't want people to have it I would not have posted it for everyone to grab and make on there own..

so again thanks dude!

Malenko · « **Reply #111 on:** April 07, 2014, 03:16:55 pm »

Quote from: ebarlow99 on April 07, 2014, 03:09:00 pm

dude........

I did not get his design from here nor another site......someone sent it to me and wanted one....so I cut one for them and they said I could keep the file....my bad!!!

Maximus THANK YOU, THANK YOU , THANK YOU if this is your design.....

FYI.....I changed the design alot to fit my needs.....

If I designed something and didn't want people to have it I would not have posted it for everyone to grab and make on there own..

so again thanks dude!

now that you know its his design, you might wanna ask permission n stuff. Good Karma and all that jazz.

ebarlow99 · « **Reply #112 on:** April 07, 2014, 03:19:34 pm »

ah permission for what?

im not asking for anything

Maximus · « **Reply #113 on:** April 07, 2014, 03:42:32 pm »

eBarlow99 and I have spoken about this, there's no problems here.

rablack97 · « **Reply #114 on:** April 07, 2014, 04:28:13 pm »

Well man, just do things right and in the right order.

Apparently you did get permission from Maximus, not sure prior or just now I dunno. It's just a professional sign-off.

All sellers on here get hell from someone for some reason, so its just part of it. You aren't the first that's gotten lit up over something like this, so no one was picking on you.

Its just preserving the future will for people to keep posting their plans for our use and or benefit, and you gain honesty points with your buyers.

No one wanted to mass produce these, you picked up on it, cool, i'm sure folks will appreciate it. Just let it be known the originator gave his blessing and all will be well, trust me i'd be on someone elses case had they stole something from you and tried to make money off it without your permission...

Anyhow......we are all here to help dont get so offended so easily......

ebarlow99 · « **Reply #115 on:** April 08, 2014, 12:17:58 pm »

still got cabs for sale

skeester · « **Reply #116 on:** June 11, 2014, 08:51:28 pm »

I want one of those Golden Tee Pedestals. How do I get one? I got a Power Putt, Silver Strike, Bags and a 6 in 1 Jamma....nuff said.

Sarver Systems · « **Reply #117 on:** August 05, 2014, 01:53:11 pm »

Quote from: ebarlow99 on February 25, 2014, 04:17:34 pm

New Custom Bartop Cocktail Flatpacks

Made from 5/8 Baltic birch

monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking

$185 plus shipping

US / CA only

Do you have any more pics of this unit? I'd like to see some inside pics so I can see how everything mounts.

Also, how heavy is it when it's complete?

whatzcrackn · « **Reply #118 on:** August 15, 2014, 01:06:30 pm »

Can you make it with seven buttons (Neogeo style). Ie six w/ one to the left off set?

quote author=ebarlow99 link=topic=131643.msg1424631#msg1424631 date=1393363054]
New Custom Bartop Cocktail Flatpacks

Made from 5/8 Baltic birch

monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking

$185 plus shipping

US / CA only
[/quote]

PL1 · « **Reply #119 on:** September 18, 2014, 10:01:28 am »

Quote from: Rick on September 17, 2014, 10:25:57 pm

Eric asked me to convey his apologies - again - and is very concerned about his reputation. He didn't leave BYOAC to be shady, or any other reason other than the negativity that we all seem to get at one time or another... I, for one, have never had issue with the guy, and wish him well. I'm happy to hear that the troubles that created the necessity for this thread have been rectified.

I'm locking this thread not because Eric has done anything wrong but to keep people from wasting their time trying to contact him here instead of at one of these locations:

* His website here

* "ebarlow99" at Bartopmania

* "bartop-arcades" at KLOV

* "ebarlow99" at Hyperspin forums

If he ever decides to re-join the BYOAC community, we will gladly unlock this thread for him.

Scott


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news