Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Grayhound Skill Crane help...  (Read 1701 times)

0 Members and 1 Guest are viewing this topic.

Metalman1661

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 32
  • Last login:October 15, 2019, 01:07:02 pm
  • I have experience with building MAME cabinets.
Grayhound Skill Crane help...
« on: January 13, 2013, 05:24:12 pm »
I picked up a pretty beat up Grayhound Skill Crane recently and an trying to get it back to working condition.

I replaced a fuse located in the double fuse holder with a 4 A fuse and i got the 'play's and 'timer' module to show '00' when plugged in.

When i plug in the machine nothing happens. I read somewhere the machine is supposed to 'home' it self.

The coin door was detached from the machine when I got it. I hooked it back up but when i click the coin trigger it does not add plays to the machine. The bill acceptor takes in a bill but spits it back out every time.

I tried playing with the dip switches but nothing happened. 

Any suggestions?

ed12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3972
  • Last login:March 31, 2018, 03:44:39 pm
  • it is what it is..."Nobody Said It Was Easy"....
Re: Grayhound Skill Crane help...
« Reply #1 on: January 14, 2013, 10:09:02 pm »
hi
do me a favor and better explain this part
>The coin door was detached from the machine when I got it. I hooked it back up but when i click the coin trigger it does not add plays to the machine. The bill acceptor takes in a bill but spits it back out every time.<
and please tell me what type of :dba: bill acepter u have.? there are many

side note here a model# would be a handy idea also

ed

Shipping something from the U.S. to Canada for repair/exchange?  Please use USPS to avoid (additional?/excessive?) shipping charges.  PM me if you have any questions.

Metalman1661

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 32
  • Last login:October 15, 2019, 01:07:02 pm
  • I have experience with building MAME cabinets.
Re: Grayhound Skill Crane help...
« Reply #2 on: January 15, 2013, 09:31:23 am »
I don’t believe the bill acceptor is the cause of the machine not working, I just figured I would note what was happening.

I will have to wait to tell you the model of the bill acceptor for when I get home.

To my knowledge the only model this claw machine has is the revision on the CPU board which is REV-2.

This Grayhound Skill Crane has the 'newer' 3 board setup. It has a joystick as opposed to the 2 button control scheme. This unit consists of the crane cpu board, crane relay board, and the board with the transformer on it that powers the bridge and crane.

To someone that is familiar with these machine, does it sound like possibly an IC chip on the CPU board can be bad? I have no way of testing nor do I know how since I rarely use a scope.

I am going to start testing continuity to all switches soon.

Any ideas?

EDIT - Typos

« Last Edit: January 15, 2013, 09:37:07 am by Metalman1661 »

Metalman1661

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 32
  • Last login:October 15, 2019, 01:07:02 pm
  • I have experience with building MAME cabinets.
Re: Grayhound Skill Crane help...
« Reply #3 on: February 06, 2013, 08:06:41 am »
I am working ont he bill acceptor now.

It is a Rowe OBA Accepter with a Rowe OBA Control Unit. The bill goes in and comes right back out.

Does anyone have any manuals for either of these units?