Author Topic: Who wants a serial plate? (Read 48723 times)

Malenko · « **Reply #120 on:** January 18, 2013, 06:17:59 pm »

thats close enough for me. I mean you see whats already on there, it looks like ---steaming pile of meadow muffin---.

CoryBee · « **Reply #121 on:** January 18, 2013, 06:32:08 pm »

Thought I would do you a solid, moved the "Bally" logo down a bit as you mentioned.

mcseforsale · « **Reply #122 on:** January 18, 2013, 09:36:21 pm »

Actually, it was a ball-hair. I hope you measured it....wait....no, I don't.

AJ

Quote from: CoryBee on January 18, 2013, 06:32:08 pm

Thought I would do you a solid, moved the "Bally" logo down a bit as you mentioned.

CoryBee · « **Reply #123 on:** January 18, 2013, 10:02:06 pm »

Quote from: mcseforsale on January 18, 2013, 09:36:21 pm

Actually, it was a ball-hair. I hope you measured it....wait....no, I don't.

CoryBee · « **Reply #124 on:** January 19, 2013, 01:19:32 am »

SERIAL PLATES

CoryBee · « **Reply #125 on:** January 19, 2013, 01:19:59 am »

Will try to get them shipped out manyana

CoryBee · « **Reply #126 on:** January 20, 2013, 02:52:51 pm »

Who's was "Ultimate Arcade"? Been super busy and sending them out in a rush.

Thanks

CoryBee · « **Reply #127 on:** January 21, 2013, 12:57:00 am »

The new metal (Steel Plates) are a huge improvement, although it is also a huge pain in the arse to cut.

On their way they is

And they are perdy

I think the one I put on ze Super Mario Machine looked pretty good as well. (Even if PL1 sends his hate

)

Cheers fellas

PL1 · « **Reply #128 on:** January 21, 2013, 02:05:25 am »

Quote from: CoryBee on January 21, 2013, 12:57:00 am

I think the one I put on ze Super Mario Machine looked pretty good as well. (Even if PL1 sends his hate )

I didn't hate on the serial plate or the machine, just the CPO with 2 Joynicorns that made Mario and Luigi wish that you had learned from Santa's advice to Ralphie.

How are they going to work as plumbers now that you've shot out their eyes with buttons?

Scott

CoryBee · « **Reply #129 on:** January 21, 2013, 02:14:09 am »

I was going to give you wonders Scott, we were to dine with the gods.....but now......

PL1 · « **Reply #130 on:** January 21, 2013, 03:56:35 am »

* Shared in the spirit of friendly dueling youtube clips.

*

You did ask for feedback in that thread.

Scott

CoryBee · « **Reply #131 on:** January 21, 2013, 04:24:43 am »

HAHA, I love that scene.

Alright, alright we should leave this thread void of our banter.

Thanks for the criticism in all my builds by the way, can only be for the good and I am only getting better for it.

What do you think of the new steel plates?

PL1 · « **Reply #132 on:** January 21, 2013, 04:33:48 am »

Looks good to me, but the real test is when your customers get them and fall in love with them.

Scott

Malenko · « **Reply #133 on:** January 21, 2013, 08:02:09 am »

no pix of mine?

TheOne · « **Reply #134 on:** January 21, 2013, 08:58:15 am »

Quote from: CoryBee on January 20, 2013, 02:52:51 pm

Who's was "Ultimate Arcade"? Been super busy and sending them out in a rush.

Thanks

That one was mine.

CoryBee · « **Reply #135 on:** January 21, 2013, 08:36:33 pm »

Quote from: Malenko on January 21, 2013, 08:02:09 am

no pix of mine?

Sorry already shipped them out

mcseforsale · « **Reply #136 on:** January 21, 2013, 09:44:28 pm »

Depending on quality and durability, I'd say if you can swing it, I'd charge about $10 - $15 per. The cost to get the labels and metal would be probably $25 investment, so it's still appealing to the consumer and you'll be making a couple hundy a week.

AJ

CoryBee · « **Reply #137 on:** January 21, 2013, 09:58:03 pm »

Quote from: mcseforsale on January 21, 2013, 09:44:28 pm

Depending on quality and durability, I'd say if you can swing it, I'd charge about $10 - $15 per. The cost to get the labels and metal would be probably $25 investment, so it's still appealing to the consumer and you'll be making a couple hundy a week.

AJ

Haha, we will see if you guys like them. Jammin0 was pretty pumped to get his and those were the soda can versions.

I doubt there is even a market for that much a week

let alone the fact I have a regular tech job to tend to.

mcseforsale · « **Reply #138 on:** January 21, 2013, 10:13:12 pm »

What kinda "tech" job?

AJ

CoryBee · « **Reply #139 on:** January 21, 2013, 10:26:48 pm »

Quote from: mcseforsale on January 21, 2013, 10:13:12 pm

What kinda "tech" job?

AJ

PM me

yotsuya · « **Reply #140 on:** January 21, 2013, 11:23:24 pm »

Professional blogger?

CoryBee · « **Reply #141 on:** January 21, 2013, 11:51:57 pm »

Quote from: yotsuya on January 21, 2013, 11:23:24 pm

Professional blogger?

No. I am a lady of the street.

mcseforsale · « **Reply #142 on:** January 22, 2013, 12:27:06 pm »

Yeah, he PM'ed me pics...it was gross.

AJ

Quote from: CoryBee on January 21, 2013, 11:51:57 pm

Quote from: yotsuya on January 21, 2013, 11:23:24 pm
Professional blogger?

No. I am a lady of the street.

CoryBee · « **Reply #143 on:** January 23, 2013, 03:53:26 pm »

I hope you all enjoy your serial plates. Will be out of the country for a month, so hopefully all went as planned. Will be on here regardless, but yea.

mcseforsale · « **Reply #144 on:** January 23, 2013, 04:20:01 pm »

Enjoy your trip!

AJ

Quote from: CoryBee on January 23, 2013, 03:53:26 pm

I hope you all enjoy your serial plates. Will be out of the country for a month, so hopefully all went as planned. Will be on here regardless, but yea.

CoryBee · « **Reply #145 on:** January 23, 2013, 04:51:58 pm »

Quote from: mcseforsale on January 23, 2013, 04:20:01 pm

Enjoy your trip!

AJ

Oh I definitely will. Thanks all for helping to improve my builds and make some cash off of the process. It is helping to fund this trip and I greatly appreciate it. I would buy you all a beer if I could (except yotusa

).

mcseforsale · « **Reply #146 on:** January 23, 2013, 05:01:56 pm »

Just not a beer from there. Where you're going, they've lowered the legal alcohol content because of all the rampant alcoholism...hahaha

AJ

Quote from: CoryBee on January 23, 2013, 04:51:58 pm

Quote from: mcseforsale on January 23, 2013, 04:20:01 pm
Enjoy your trip!

AJ

Oh I definitely will. Thanks all for helping to improve my builds and make some cash off of the process. It is helping to fund this trip and I greatly appreciate it. I would buy you all a beer if I could (except yotusa ).

CoryBee · « **Reply #147 on:** January 23, 2013, 05:11:41 pm »

Quote from: mcseforsale on January 23, 2013, 05:01:56 pm

Just not a beer from there. Where you're going, they've lowered the legal alcohol content because of all the rampant alcoholism...hahaha

AJ

Quote from: CoryBee on January 23, 2013, 04:51:58 pm
Quote from: mcseforsale on January 23, 2013, 04:20:01 pm
Enjoy your trip!

AJ

Oh I definitely will. Thanks all for helping to improve my builds and make some cash off of the process. It is helping to fund this trip and I greatly appreciate it. I would buy you all a beer if I could (except yotusa ).

Well that is bull excrement.

yotsuya · « **Reply #148 on:** January 23, 2013, 07:29:39 pm »

No beer for me, bro? He who encouraged and grew to love The Doorscade? I'm hurt, man. Really hurt.

CoryBee · « **Reply #149 on:** January 23, 2013, 09:39:03 pm »

Quote from: yotsuya on January 23, 2013, 07:29:39 pm

No beer for me, bro? He who encouraged and grew to love The Doorscade? I'm hurt, man. Really hurt.

Just making sure you are listening. Mad love to this community and if any of you been to Dublin and have recommendations for things to see around Ireland (or europe) don't hesitate.

jammin0 · « **Reply #150 on:** January 24, 2013, 09:25:47 pm »

Feel like I'm derailing a little bit but I thought I would post these little guys I just got in the mail from Cory. Actually he got me the original ones made of soda cans and before I could get them on the thicker version showed up today in the mail. A nice little surprise because I didn't know they were coming. Anyway, Thanks dude. I'm happy with them.

CoryBee · « **Reply #151 on:** January 24, 2013, 10:05:54 pm »

Haha, I am glad you liked that. I remade your cause I figured it would be a nice little gift. I loved wreck-it-ralph, had a bunch of extra metal and some space left on the print page. When your cab is all done and through, it would be nice to see it all in a higher quality.

mcseforsale · « **Reply #152 on:** January 25, 2013, 09:27:20 am »

Get back to your bangers and mash!

AJ

Quote from: CoryBee on January 24, 2013, 10:05:54 pm

Haha, I am glad you liked that. I remade your cause I figured it would be a nice little gift. I loved wreck-it-ralph, had a bunch of extra metal and some space left on the print page. When your cab is all done and through, it would be nice to see it all in a higher quality.

CoryBee · « **Reply #153 on:** January 25, 2013, 07:40:58 pm »

Quote from: mcseforsale on January 25, 2013, 09:27:20 am

Get back to your bangers and mash!

AJ

Quote from: CoryBee on January 24, 2013, 10:05:54 pm
Haha, I am glad you liked that. I remade your cause I figured it would be a nice little gift. I loved wreck-it-ralph, had a bunch of extra metal and some space left on the print page. When your cab is all done and through, it would be nice to see it all in a higher quality.

Not quite there yet, layover in phili $:-\$

griffindodd · « **Reply #154 on:** January 28, 2013, 12:25:35 pm »

Got my plates Cory they look great. Thanks!

Sent from my pocket ZX81

mcseforsale · « **Reply #155 on:** January 30, 2013, 11:53:56 am »

OK, I'm a bit pissed, but I have a funny story. First of all, this in no way is Corybee's fault. I want to state that immediately. I'm pissed at the Sacramento mail sorting facility.

So, anywhoo...I've been watching y'all get your amazing serial plates...dreaming of the day that I can install them on 2 arcades as the complete and last final touch. Knowing that I'm an entire continent away, I waited and waited.

So, I got home last night and there was an envelope....a TORN envelope in a plastic bag covered in USPS-speak about how they process 7 million pieces of mail and yada, yada...sometimes things happen, yada...

My heart sank. I have relatives coming in tomorrow and wanted to finish "Fistful of Quarter" for my father in law before they got here.

So, I gingerly feel through the baggie and there's no way in hell there's metal plates in there. The envelope is clearly marked by Coreybee...but it is completely torn in half, right down the middle. Upon opening the baggie to see what's left of whatever is in there, I notice a note/letter.

So, I open up the letter and begin reading. It's a letter from a con in jail to one of his bros about working out, the conditions of the jail, etc. WTF?!?!?!

I know Cory's out of the country for a WHILE, so this probably won't get fixed for some months...but I though it interesting that this type of stuff only happens to me.

Here's how it was delivered:

Here's all the USPS crap that basically says there's nothing I can do about it:

Anyway, I got to learn a bit about northern california jail systems, etc.

AJ

CoryBee · « **Reply #156 on:** January 30, 2013, 12:15:33 pm »

.....I pm'ed you about it and will be back on the 19th to sort that out. Sorry for the USPS (will use proper packaging this time)

But.....how the hell did a prison letter get in there?.?>??>?>xb?sdf

Much love and glad you guys who recieved it liked them.

Especially on the amazing build you have put together groddindood

Malenko · « **Reply #157 on:** January 30, 2013, 12:36:00 pm »

Im super happy with mine, when you doing another batch?

CoryBee · « **Reply #158 on:** February 01, 2013, 12:21:14 pm »

I get back to the good ol' USofA on the 20th. Can do another run of 8 or so if there is interested. Need to remake Mc's plates anyways.

On another note, was at Dublin's trinity university, lo and behold there was a Fix-It-Felix cab in their Science Gallery......but the place was closed to the public......

Haven't been able to play one and accross the pond I find it, but cannot even examine it. Just my luck.

HaRuMaN · « **Reply #159 on:** February 01, 2013, 12:53:10 pm »

I'll be wanting one of these for sure. Maybe even 2.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news