Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Pics of my tilt switch to detect side/ front bump for 1/2 pinball control panel  (Read 1105 times)

0 Members and 1 Guest are viewing this topic.

Reg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 45
  • Last login:April 27, 2004, 10:43:45 pm
  • I want to Build My Own Arcade Controls!!
Pics of my tilt switch to detect side/ front bump for 1/2 pinball control panel
« on: October 21, 2003, 10:54:55 pm »
Hi,

here are the pics of the tilt switch to detect the side/front  bumps
of my 1/2 pinball control panel:

http://www.mediom.com/~regisma/tilt003.jpg
http://www.mediom.com/~regisma/tilt004.jpg
http://www.mediom.com/~regisma/tilt005.jpg
http://www.mediom.com/~regisma/tilt006.jpg
http://www.mediom.com/~regisma/tilt007.jpg

I'm lucky because 2 of the bumps are on the same wire of my keyboard matrix (Space and / )

I have chosen screws because I can ajust the sensivity the way I like it.

thanks

Reg
Logged

mkdevo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 130
  • Last login:February 09, 2024, 09:31:59 pm
Re:Pics of my tilt switch to detect side/ front bump for 1/2 pinball control pan
« Reply #1 on: October 22, 2003, 06:33:53 am »
interesting.. but do we really need a new thread every time you post new pics? you can just keep one thread and update it.  ???
Logged

Reg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 45
  • Last login:April 27, 2004, 10:43:45 pm
  • I want to Build My Own Arcade Controls!!
Re:Pics of my tilt switch to detect side/ front bump for 1/2 pinball control pan
« Reply #2 on: October 22, 2003, 06:47:37 am »
ok!
Logged

Reg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 45
  • Last login:April 27, 2004, 10:43:45 pm
  • I want to Build My Own Arcade Controls!!
resume of the result of the bump tilt pendulum switch
« Reply #3 on: October 22, 2003, 10:37:12 pm »
Hi,

I have tested my new bump tilt pendulum switch.

The best result is when the distance between cone of the tilt switch ans the adjustments screws have a gap of 1 milimeter.

If greater... the table need to be pushed much harder.

For now the surfaces between my arcade cabinet and 1/2 pinball controller are very rough ...I need to soften those to ease the bumping.

thanks

Reg
Logged
Pages: [1]
  
Go Up
« previous next »