Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Q-Bert fans!  (Read 4120 times)

0 Members and 1 Guest are viewing this topic.

creatine28

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 481
  • Last login:July 26, 2012, 03:41:48 pm
  • Which way to the Arcade?
Q-Bert fans!
« on: October 16, 2003, 07:36:58 pm »
Thought this might be of interest to the q-bert fans out there?

http://www.ionpool.net/arcade/gottlieb/qbert.html

TalkingOctopus

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1722
  • Last login:August 04, 2025, 03:48:02 am
  • @!#?@!
    • My Arcade
Re:Q-Bert fans!
« Reply #1 on: October 16, 2003, 09:53:30 pm »
I love Q-bert.  It's too bad on my control panel Q-bert is unplayable  :'( .  In the past, I played way too much Q-bert on NES.
« Last Edit: October 16, 2003, 10:44:27 pm by TalkingOctopus »

menace

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2565
  • Last login:November 08, 2024, 01:49:35 pm
Re:Q-Bert fans!
« Reply #2 on: October 16, 2003, 10:22:47 pm »
thanks for the link!
its better to not post and be thought a fool, then to whip out your keyboard and remove all doubt...

paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10994
  • Last login:July 06, 2024, 08:43:49 pm
  • Awesome face!
Re:Q-Bert fans!
« Reply #3 on: October 16, 2003, 10:27:01 pm »
I have an NOS Willis Q*Bert control panel overlay on the way from Todd at TNT Amusements. I am going to use it to make a standalone Q*Bert panel.
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.

spidermonkey

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 850
  • Last login:October 01, 2023, 04:15:59 am
  • Bombjack junkie
Re:Q-Bert fans!
« Reply #4 on: October 17, 2003, 12:58:01 am »
Hey T-Octopus,
If you have an 8-way on your control panel then you can play Q-bert and Congo Bongo just fine. Go into the "Input this game" menu in Mame and do this. For joystick right, re enter it by quickly moving your 8-way joystick right and then down. If you do it quickly mame will except both inputs. For left hit left and up. For up hit up and right and lastly for down hit down and left. Setting it up like this will allow mame to only recognize the horizontals which is what you want for Q-bert and Congo Bongo. This is the next best thing if you don't have a 4-way mounted on a 45 degree angle. It works quite well.
"Sinistar has bad breath"

DaveMMR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3244
  • Last login:April 28, 2025, 11:33:13 am
Re:Q-Bert fans!
« Reply #5 on: October 17, 2003, 01:27:12 am »
I had to re-read that a few times but then I got it.  I got confused because I think you meant MAME only reconized diagonals.  Good idea!

I was toying with the idea of adding a diagonal four way on my panel, but that's back burner for now.

Bill_S

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 242
  • Last login:June 22, 2018, 08:23:57 am
  • aka buzzdalf
Re:Q-Bert fans!
« Reply #6 on: October 17, 2003, 06:48:16 am »
I'm playing it with my 4-way.  It takes a few games to get a feel for it, but it's playable.
I've got Oscar's Q*Bert restrictor installed in another control panel on a Happ's super and it helps, too.

Hammerbot

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 57
  • Last login:September 04, 2005, 10:40:51 am
  • All work and no play...
Re:Q-Bert fans!
« Reply #7 on: October 17, 2003, 10:20:17 am »
Has anyone worked up plans on how to rotate a 4 way to play these games? I looked at it for a while but it always got too complicated.

I will try the "input this game" suggestion. I hope it works...

Smittydc

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 224
  • Last login:October 05, 2008, 12:48:10 am
  • because its fun!
Re:Q-Bert fans!
« Reply #8 on: October 17, 2003, 10:21:55 am »
get an e-stick
Build a man a fire, he's warm for a night.  Set a man on fire, he's warm the rest of his life.

Rocky

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 562
  • Last login:December 30, 2009, 12:38:41 pm
  • I want to finish my cab before I retire!!
Re:Q-Bert fans!
« Reply #9 on: October 18, 2003, 05:55:43 pm »
My MAME machine is an original Q*bert (converted to a Side Arms).  I decided to make a dedicated Q*bert CP (out of wood) just for the fun of it.  It doesn't have the artwork, but it looks cool with the Q*bert marquee and the lower artwork with Q*bert playing on the monitor!

!#@*!%,

Rocky

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:July 25, 2005, 05:39:21 pm
  • your mom is a llama!
    • PICS OF MY LAME CAB
Re:Q-Bert fans!
« Reply #10 on: October 18, 2003, 06:44:34 pm »
I love this game so much I had to put a dedicated 4 way on my cp.  It is the blue stick up left.

http://www.geocities.com/breetia00/cp

Pipercub

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 206
  • Last login:December 08, 2009, 10:59:48 pm
  • My living room is a F'n arcade
    • Subaru Brat
Re:Q-Bert fans!
« Reply #11 on: October 18, 2003, 09:06:00 pm »
This is my conversion of a POW cab to a Q*Bert. My joystick in on a slotted plate that allows me to rotate the baseplate for Q*Bert of normal.