Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Rowe R-86 NEED HELP  (Read 1684 times)

0 Members and 1 Guest are viewing this topic.

jac85742

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:October 19, 2012, 06:41:14 pm
  • I want to build my own arcade controls!
Rowe R-86 NEED HELP
« on: October 19, 2012, 06:10:56 pm »
I have a Rowe R-86 jukebox.  Here is my problem.  Unable to make selections anymore because magazine spins, arm pulls down a 45, the needle hits the record for about 5 seconds then arm takes away record and selects another for play.  This goes on and on and only stops when the unit is unplugged.  Plug it back in and the same sequence happens.  over and over.  Has anybody run in to this problem or know how to remedy it?  I'm pretty attached to my jukebox and not being able to use it really sucks!

Jack

ed12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3972
  • Last login:March 31, 2018, 03:44:39 pm
  • it is what it is..."Nobody Said It Was Easy"....
Re: Rowe R-86 NEED HELP
« Reply #1 on: October 19, 2012, 10:19:16 pm »
hi
that sound's like it was put into full test
just to cycle through every record in the rack
if u do not have the manual
go here
>http://tomszone.com/Manuals.html#AMIMan<
if u have the manual ?
look into your code set,and make sure youe service switch is set right
ie 1 side is for full play the other is for service
if it is set to service and u entered a code via the remote
it will do exactley what it is doing
also u could ask on
jukebox-list-request@lists.netlojix.com

ed
Shipping something from the U.S. to Canada for repair/exchange?  Please use USPS to avoid (additional?/excessive?) shipping charges.  PM me if you have any questions.

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1085
  • Last login:July 19, 2020, 01:22:45 pm
Re: Rowe R-86 NEED HELP
« Reply #2 on: October 22, 2012, 09:24:15 am »
Hello ed12,

On the R-86 you are talking nonsense it does not have a built in test feature.
The R-86 can not be used with a remote.

If the jukebox picks out every selection this can be canceled by pressing the Clear Selection Memory button.

Regards
Alan

Alan Hood
ami-man
UK