Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: My PC is dead - whats a good replacement ? ps2 / keywiz concerns ?  (Read 949 times)

0 Members and 1 Guest are viewing this topic.

Tonyjambo

  • Guest
  • Trade Count: (0)
So when i built my cab i just used an old Dell Dimension 4450 I had lying around, yesterday the AGP graphics card died and I think i might use it a san excuse to put in a better machine. Any thoughts as to what I should be looking at ?  One thing I'm conscious of is that I'd like a PS2 interface for the keywiz and the trackball if possible and i dont see too many pc's nowdays with ps2 ports.

Am i worrying about nothing with the keywiz and would it be fine with a ps2 -> usb adapter ?

Main reason for extra processing power is to run emus other than mame.

RandyT

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7014
  • Last login:Yesterday at 02:07:32 pm
  • Friends don't let friends hack keyboards.
    • GroovyGameGear.com
Re: My PC is dead - whats a good replacement ? ps2 / keywiz concerns ?
« Reply #1 on: September 25, 2012, 01:14:45 pm »
I bought an Asus Core-2 Quad a couple of years ago, which is a lot of machine, and it has a PS/2 port for the keyboard.  A PS/2 to USB converter is fine for a trackball, but not the best solution for a KeyWiz.

I don't know what your budget is, but this i5 Quad looks like bargain, and it has both.  There are still plenty of options out there with the full complement of ports.  It's only the systems or manufacturers looking to save a buck, or don't have the space on the back panel,  which exclude the legacy ports.  If you're into building your own, it's also not difficult to find new motherboards with both.