Can someone post pics of the U-Marc Servo Stick

[griffindodd]

Hi guys,

If anyone has the ultimarc servo sticks can you please post some pictures of the side profile, also a pic of how much of the joystick shaft protrudes from the bottom of the housing. Also could you check to see if the stick shaft is hollow or solid?

Thanks for the help, I'm scheming on some devious mods but I need to know more about these sticks to know if I can acheive what I am going for.

Thanks

[Nephasth]

http://www.ultimarc.com/servostik.html

[griffindodd]

http://www.ultimarc.com/servostik.html

Lol you are going to get a spanking. Yes I know they have pics on the site but they aren't very good for answering the questions I have here. It does look like the shaft protrudes a little and the presence of a screw would hint at a fully hollow shaft but that may not be the case.

[Nephasth]

That's not a screw, it's a slot milled in the end of the shaft. The shaft is not hollow.

Here's some measurements of the stick (J-stik): http://www.ultimarc.com/controldiags.html

[PL1]

Hi guys,

If anyone has the ultimarc servo sticks can you please post some pictures of the side profile, also a pic of how much of the joystick shaft protrudes from the bottom of the housing. Also could you check to see if the stick shaft is hollow or solid?

Thanks for the help, I'm scheming on some devious mods but I need to know more about these sticks to know if I can acheive what I am going for.

Thanks

The shaft is solid per posts in the original thread.


Scott

[griffindodd]

Thanks guys that covers everything I needed to know, back to the drawing board on this one.