Treasure Chest Crane dip switch settings

[Qzar_Toledo]

Hello!  I have a Treasure Chest crane that was purchased at auction.  I have no idea what year it is.  The board with the dip switches is printed with: GS20010103 Rev. 0 (pic included)

Right now it is .50 per play.  We wanted to make it 1.00 per play, but no matter what combo I change the dipswitches to it will only be .25 or .50 per play.

I've seen a few posts regarding this topic - so sorry to re-hash!  I tried to use this: http://forums.arcade-museum.com/showthread.php?t=180930  and it didnt work - but it only shows setting for 2 set of switches, and there are 3 on mine.

Any help would be appreciated!  Thanks for looking at my post.

[Marc Linn]

Here you go!

http://www.sendspace.com/file/ngnqj4   

click on  *Click here to start download from sendspace * to download the .pdfs.  Left side is in English

[CreepyWhiteBaby]

Any chance you can repost that manual? I have that same board set and the link is dead.

[SavannahLion]

There's probably better out there but a five minute search turn this up: http://forums.arcade-museum.com/showthread.php?t=180930

[CreepyWhiteBaby]

Yeah I saw that one. This board has 3 dip switch banks not 2. It's exactly as pictured above. Those switch settings don't seem to work correctly. I also would need the claw strength setup procedure. Thanks for checking though if you see anything else I'd be happy to check it out.

[ed12]

a=it is the wrong rom for what u want to do

copy it send it to me pm or e-me it
edwarddowney@hotmail.com i will patch it for u
PLEASE in the e-me tell me what u want c$-eng-plnd$-usd$

next u have a set of pots that should set your claw current
>hold-in-current<
another 1 sets the volume
the other 1 sets the time
if they are not there?
then u will need to do few more steps

ed