Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: TFTTC left flipper cutting out randomly  (Read 968 times)

0 Members and 1 Guest are viewing this topic.

renodakota

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:July 26, 2012, 10:33:41 am
TFTTC left flipper cutting out randomly
« on: July 22, 2012, 10:47:20 am »
I can not figure this out,
I've checked my fuses and connections. My machine's left flipper randomly decides not to fire.
Mostly I have noticed it while the right flipper is up.
Is the flipper getting close to fried?
Any advice?
Thanks guys

smartbomb2084

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 643
  • Last login:May 17, 2018, 02:57:42 pm
  • Having a SMART phone will make you DUMB.
Re: TFTTC left flipper cutting out randomly
« Reply #1 on: July 22, 2012, 10:52:21 am »
Dirty or mis-adjusted EOS switch?

Is the coil's magnet wire broken right at the coil lug making intermiitent contact?

renodakota

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:July 26, 2012, 10:33:41 am
Re: TFTTC left flipper cutting out randomly
« Reply #2 on: July 24, 2012, 03:01:20 am »
You got it
Thanks alot. She is workin like a champ now :cheers:

renodakota

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:July 26, 2012, 10:33:41 am
Re: TFTTC left flipper cutting out randomly
« Reply #3 on: July 24, 2012, 11:31:40 am »
I resoldered the coil wires and cleaned off my switch and it works full time again.

This is my first pin so I'm learning as I go sorry for any future stupid questions.
I need to remember to look around some more before I get pissed I can't play,
I bought it to learn not just to play with when I'm drunk.
Does anyone have a good maintenance plan for DE machines?
Thanks again guys