Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Need help with my Lucky and Wild (NAMCO 1992) machine  (Read 1205 times)

0 Members and 1 Guest are viewing this topic.

NotsoLuckyandWild

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:August 07, 2012, 11:19:54 pm
Need help with my Lucky and Wild (NAMCO 1992) machine
« on: July 18, 2012, 03:41:20 am »
The video is pretty messed up and is affected by the coin slot wires. If I move the coin slot wires sometimes the picture is a little bit better.

Overall it is too dark, has some ghosting, and it has a lot of snow.

Youtube video of the issue:


Picture of the issue:


Any help would be greatly appreciated.

NotsoLuckyandWild

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:August 07, 2012, 11:19:54 pm
Re: Need help with my Lucky and Wild (NAMCO 1992) machine
« Reply #1 on: July 18, 2012, 08:39:51 pm »
Adding to this I tried every manual setting (V.Freq, H. Freq etc).

Grimoz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 111
  • Last login:August 06, 2018, 02:11:22 am
Re: Need help with my Lucky and Wild (NAMCO 1992) machine
« Reply #2 on: July 19, 2012, 01:03:11 am »
I had a similar problem with my old monitor, I had to replace it because nothing I did or tried ever fixed it : (

NotsoLuckyandWild

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:August 07, 2012, 11:19:54 pm
Re: Need help with my Lucky and Wild (NAMCO 1992) machine
« Reply #3 on: July 19, 2012, 04:00:25 pm »
I had a similar problem with my old monitor, I had to replace it because nothing I did or tried ever fixed it : (

Damn