Author Topic: Custom Control Panels for sale (Read 39168 times)

yaksplat · « **on:** July 02, 2012, 02:40:22 pm »

My services:
AutoCAD layout
Custom Contol panels
Matching routed plexiglass

I typically build everything out of 3/4" birch ply.

Examples of my work can be found on my blog: http://yaksplat.wordpress.com

An order of 4 custom control panels w/plexiglass that shipped out last week:

Please email, post or PM any questions!
CustomControlPanels .at. gmail.com

HaRuMaN · « **Reply #1 on:** July 02, 2012, 02:47:05 pm »

Not really looking at the moment, but what would a typical cost be? Say for one of those panels pictured above?

Mysterioii · « **Reply #2 on:** July 02, 2012, 03:05:04 pm »

Quote from: HaRuMaN on July 02, 2012, 02:47:05 pm

Not really looking at the moment, but what would a typical cost be? Say for one of those panels pictured above?

I am also curious. Looking to rebuild my CP soon but haven't found the time to mess around with laying it out in a cad program yet... it's been probably 15 years since I really did any cad so it's a relearning curve just to make anything.

werejag · « **Reply #3 on:** July 02, 2012, 10:08:15 pm »

can you do metal also?

northerngames · « **Reply #4 on:** July 02, 2012, 10:39:33 pm »

also is it the CP tops only or do you do the whole cp?

any bartop cad's?

yaksplat · « **Reply #5 on:** July 02, 2012, 11:11:40 pm »

Quote from: HaRuMaN on July 02, 2012, 02:47:05 pm

Not really looking at the moment, but what would a typical cost be? Say for one of those panels pictured above?

Those panels were roughly $60 each. Matching Plexi was about $40.

Quote from: werejag on July 02, 2012, 10:08:15 pm

can you do metal also?

Unfortunately no. I don't have the equipment for sheetmetal work. I have a mill and lathe and am able to do some custom metal working, but I still have to get all of my metalworking tools unpacked and organized.

Quote from: northerngames on July 02, 2012, 10:39:33 pm

also is it the CP tops only or do you do the whole cp?

any bartop cad's?

I can do the whole panel, hinges and all. I don't currently have any bartop plans, but I can make anything i can draw.

Keep 'em coming.

SNAAKE · « **Reply #6 on:** July 02, 2012, 11:35:38 pm »

do you read tweets while you make these panels

guessing you can do custom layout and cut the panel for for japanese buttons and sticks? I may need one of these from you. will PM when I am ready. planning a new 1player cabinet.

yaksplat · « **Reply #7 on:** July 03, 2012, 12:10:53 am »

Quote from: SNAAKE on July 02, 2012, 11:35:38 pm

do you read tweets while you make these panels
guessing you can do custom layout and cut the panel for for japanese buttons and sticks? I may need one of these from you. will PM when I am ready. planning a new 1player cabinet.

I can always pick up a new bit if the fly cutter can't make the hole, but i have a wide variety of forstner bits as it is, and holes for buttons usually have kind of a wide tolerance with the flanges on them.

Bit of trivia: Nick Offerman is an expert woodworker and he's got one hell of a work shop.

Nategc20 · « **Reply #8 on:** July 31, 2012, 11:09:15 am »

I could use your service.

Hoopz · « **Reply #9 on:** July 31, 2012, 01:34:08 pm »

Ballpark shipping costs assuming UPS ground or whatever you've used?

yaksplat · « **Reply #10 on:** July 31, 2012, 01:37:15 pm »

I shipped 4 control panels and plexi tops from NY to AZ, 38# crated. That was $54.

Gray_Area · « **Reply #11 on:** July 31, 2012, 03:31:55 pm »

Quote from: yaksplat on July 31, 2012, 01:37:15 pm

I shipped 4 control panels and plexi tops from NY to AZ, 38# crated. That was $54.

It may be a different rate for a single panel, especially if you have to use a different service.

yaksplat · « **Reply #12 on:** July 31, 2012, 04:23:04 pm »

True. Size, weight and carrier thorw a bunch of variables in there. That's why i don't typically quote shipping until the item is ready to be shipped. I can only give a ballpark figure.

rca420 · « **Reply #13 on:** August 18, 2012, 11:21:18 pm »

[DELETED] PM'ed you instead.

DeLuSioNal29 · « **Reply #14 on:** August 18, 2012, 11:53:03 pm »

You're in NY. Where exactly?

yaksplat · « **Reply #15 on:** August 19, 2012, 12:02:14 am »

Outside Buffalo.

MR SAMSA · « **Reply #16 on:** August 19, 2012, 03:45:06 pm »

PMMED.... Thanks!

DeLuSioNal29 · « **Reply #17 on:** August 19, 2012, 10:31:05 pm »

Rats! Thought you were closer. I'm near NYC. :-)

yaksplat · « **Reply #18 on:** September 20, 2012, 06:39:04 pm »

One happy customer

KeithPuetz · « **Reply #19 on:** September 21, 2012, 04:58:44 am »

That mustache is glorious.

yaksplat · « **Reply #20 on:** September 21, 2012, 08:21:04 am »

A couple more panels that have shipped recently:

I threw in an extra plexi on that second one to offset some delays i had on my end. Hopefully it'll come in handy down the road.

yaksplat · « **Reply #21 on:** September 21, 2012, 01:55:01 pm »

Quote from: KeithPuetz on September 21, 2012, 04:58:44 am

That mustache is glorious.

HA!. I wish it were mine.

MR SAMSA · « **Reply #22 on:** October 10, 2012, 11:44:10 pm »

I worked with yaksplat and ordered an oversize / designed panel and it turned out great!
I would recommend his services! It shipped to me in 1 day!

Thanks again!

CZ

Meph · « **Reply #23 on:** October 11, 2012, 07:42:25 am »

Yaksplat, do you have layouts for Mortal Kombat 1/2 (5 button) and Mortal Kombat 3/4 (6 button)? Also, where outside of Buffalo are you? I'm between Rochester and Syracuse so pickup would be desirable.

yaksplat · « **Reply #24 on:** October 11, 2012, 09:22:35 am »

Here's a 5 button MK panel and plexi crated for shipping. I can create any button layout you want though.

I'm about 10 miles east of buffalo. But it may cost you more to drive than shipping. The panel in this post (48" x 24") only cost $15.36 to ship to Michigan.

KeithPuetz · « **Reply #25 on:** October 11, 2012, 04:05:13 pm »

Hey yaksplat you got my e-mail of the art right?

Pixeljunkie · « **Reply #26 on:** November 22, 2012, 04:31:16 pm »

Can I order an MK2 control panel from you ?

Pixeljunkie · « **Reply #27 on:** November 24, 2012, 06:07:59 am »

He doesn't answer my mails, or reply here

yotsuya · « **Reply #28 on:** November 24, 2012, 02:31:21 pm »

To be fair, it is a holiday weekend. Give him a few days.

Pixeljunkie · « **Reply #29 on:** November 24, 2012, 03:09:12 pm »

Quote from: yotsuya on November 24, 2012, 02:31:21 pm

To be fair, it is a holiday weekend. Give him a few days.

My apologies, i'm from Europe so I don't know much about your holidays

yaksplat · « **Reply #30 on:** November 27, 2012, 02:42:34 pm »

I think I have replies out to everyone now. If you were missed please send another email.

It's bad when you get 600 emails over the course of a few days and have to sift through them all looking for anything important.

rabidfrog · « **Reply #31 on:** December 20, 2012, 05:09:59 pm »

Hi Mr. Splat,
Are you still doing custom panels? I had a couple of emails but havent heard anything in a while.
Cheers

yaksplat · « **Reply #32 on:** January 17, 2013, 11:42:45 am »

A couple pics of a recently completed panel with a recessed trackball mount and attached box.

And now that I look at those pics, wow, my shop is a disaster.

Brian74 · « **Reply #33 on:** January 18, 2013, 02:59:33 pm »

I emailed you too. No reply

yaksplat · « **Reply #34 on:** January 18, 2013, 06:14:30 pm »

if you're boxerman, you're next in the queue. If not, send me another email.

yaksplat · « **Reply #35 on:** January 22, 2013, 10:19:28 am »

All quotes are out. If you're still waiting on one, please let me know. Gmail decided that a bunch of quote requests were all spam, so hopefully I've got everyone covered now.

Bartopia · « **Reply #36 on:** May 02, 2013, 01:07:06 am »

can't PM you as my account here is new- I'm interested in getting a custom bartop design fabbed- how else can I contact you?

Fallen_Veteran · « **Reply #37 on:** May 17, 2013, 03:41:04 pm »

I will have to keep you in mind sir...

daninfamous · « **Reply #38 on:** June 27, 2013, 10:57:09 pm »

still selling these?

vinder · « **Reply #39 on:** July 27, 2013, 03:25:53 pm »

I'm new so I can't PM yet. I am interested in a control panel with box. How else can I message you? Thanks.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news