Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Gauntlet II screen tear  (Read 1244 times)

0 Members and 1 Guest are viewing this topic.

ahofle

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4532
  • Last login:April 21, 2019, 01:03:49 am
    • Arcade Ambience Project
Gauntlet II screen tear
« on: May 12, 2012, 12:21:40 am »
I'm not sure this is a GroovyMAME issue, but I found some strange behavior with Gauntlet II.  There is a vertical line/screen tear on the left 25% or so of the screen.  You can see it right when starting a new game, the 'mortar' between the bricks on the floor is wider along that line.  As you walk to the right, you can see the screen tear along the same line.  It seems more like an emulation error than refresh.  The strange thing is that Gauntlet I has the exact same resolution and does not exhibit this behavior (at least not that I can see).  Does anyone else see the same?

Calamity

  • Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Online Online
  • Posts: 6543
  • Last login:Today at 06:27:07 am
Re: Gauntlet II screen tear
« Reply #1 on: May 13, 2012, 10:57:42 am »
Hi ahofle,

Just tried gaunt2 and I couldn't see the anything of what you describe. Make sure there's no residual video setting affecting this particular game, probably inside the cfg folder.
Important note: posts reporting GM issues without a log will be IGNORED.
Steps to create a log:
 - From command line, run: groovymame.exe -v romname >romname.txt
 - Attach resulting romname.txt file to your post, instead or pasting it.

CRT Emudriver, VMMaker & Arcade OSD downloads, documentation and discussion:  Eiusdemmodi

ahofle

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4532
  • Last login:April 21, 2019, 01:03:49 am
    • Arcade Ambience Project
Re: Gauntlet II screen tear
« Reply #2 on: May 13, 2012, 08:05:52 pm »
Wow, once again you are right on the money!
I thought cfg was only for input.  There was some weird stretch setting in there.  Deleted it and now it's all good again!   :cheers: