IC/FS: The Great Astro Part Out of 2012 [SF, CA, USA]

[KaPH33n]

A little while ago I picked up a lot of Astros.  I got more shells than I need so I'm going to part out the stuff leftover.  None of the shells are immaculate, some are pretty crummy.  The nicer stuff will be sold first come first served.



I'll go ahead and make this clear... there are Astro parts that are in high demand, these are the parts that I do NOT have on hand:
- Control Panel Hinges
- Speakers
- Move Strip Covers
- Front Main Access Door
- Tubes/Chassis
- PSUs
- Wiring Harnesses
- Coin Mechs/Boxes
- Keys/Locks/Tangs

Basically everything else is pretty much up for grabs though.

Things I know I DO have extras of:
- Front and Back Shell Halves
- Every other Panel and Door except Main Access
- Control Panel Uppers
- 2L6B Astro Panels
- Lighting Ballasts
- Tube Mounts
- CPS2/3 Kick Harnesses $13

This stuff is located in San Francisco.  If you're local, you are more than welcome to come by and pick through.  I prefer this over shipping to be honest.  I am open to hearing offers on anything.  Let me know if there's a specific part you're looking for and I'll tell you if I got it.

If you're not local to me, it will be very difficult for me to ship anything that doesn't fit into USPS flat rate boxes.  Take this into consideration.

Here is a picasa album with pics of some of the stuff.  This is not everything, more pics to come.
https://picasaweb.google.com/111586248332282735415/PartOut120504?authuser=0&feat=directlink


The following are shipped prices!  If you're outside the US pm me for a price quote.  If you're local to me, come by and pick up stuff for a reduced (no shipping) price!

Pictured Items:
Dynamic Golf Panel $65
Astro 2L12B panel with start button mod $55 [ON HOLD]
Net City 1L6B panel 1 $40
Net City 1L6B panel 2 $40
Net City 1L6B panel 3 $40
Net City 1L6B panel 4 $40
Net City 1L6B panel 5 $40
Net City 1L6B panel 6 $40
Astro 2L6B panel 1 $50
Astro 2L6B panel 2 $50
Astro 2L6B panel 3 $50
Astro 2L6B panel 4 $50
Versus City 1L6B $50 [ON HOLD]
Blast city 2L8B $50 [SOLD]
Control Panel Upper $50 [SOLD]
Cracked Control Panel Upper w/ populated 2L6B $80
New Astro City Flat Square 29 Green Plastic 1 $20
New Astro City Flat Square 29 Green Plastic 2 $20
New Astro City Flat Square 29 Green Plastic 3 $20
Astro City Top Black Plastic $25 [SOLD]
Tube Mount Top 1 (warped) $25
Tube Mount Top 2 (frame attached w/ stripped bolt) $25
Tube Mount Top $40 (good condition, not pictured)
Tube Mount Bottom $40
Astro Tube Bezel 1 $45
Astro Tube Bezel 2 $45
Astro Back Marquee Panel 1 $40
Astro Back Marquee Panel 2 $40
Astro Back Marquee Panel 3 $40
Astro Back Marquee Panel 4 $40
Astro Back Marquee Panel 5 $40
Astro Back Marquee Panel 6 $40
Astro Back Monitor Panel 1 $40
Astro Back Monitor Panel 2 $40
Astro Back Monitor Panel 3 $40
Astro Back Monitor Panel 4 $40 [SOLD]
Astro Front Coin Box Door Trim 1 $30
Astro Front Coin Box Door Trim 2 $30
Astro Front Coin Box Door Trim 3 $30
Astro Front Coin Box Door 1 $40
Astro Front Coin Box Door 2 $40
Astro Front Coin Box Door 3 $40
Astro Front Coin Box Door 4 $40
Astro Front Coin Mech Door 1 $40 [SOLD]
Astro Front Coin Mech Door 2 $40
Astro Front Coin Mech Door 3 $40
Astro Front Coin Mech Door 4 $40
Astro Front Coin Mech Door with Mech Bracket 1 $50
Astro Front Coin Mech Door with Mech Bracket 2 $50
Astro Lighting Ballast (no bulb or starter) $35

More parts and pics to come...  Just need to get around to organizing the parts and indexing them.  Please PM me if you are looking for an Astro part.

If you don't agree with my prices make me an offer.  Willing to give discounts if you buy 3 or more pieces.

[KaPH33n]

Bump!  Marked what has been sold.  some stuff shipped.  Lots of parts left!

[opt2not]

You would happen to have the top cover for the sega amps laying around in that pile?

[KaPH33n]

Let me get back to you on that.  I have two of those amps, but I haven't gotten around to testing them yet.  If one of them is not working I will sell you the top piece.

You could just fabricate one out of wood pretty easily though...  It's on the inside so it wouldn't show.  Unless you just want everything to be stock.

[opt2not]

Let me get back to you on that.  I have two of those amps, but I haven't gotten around to testing them yet.  If one of them is not working I will sell you the top piece.

You could just fabricate one out of wood pretty easily though...  It's on the inside so it wouldn't show.  Unless you just want everything to be stock.

Nice! Been looking for a while now.

Yeah, I was thinking about the wood route, but honestly I'd rather it stock.

But Let me know what you find out about that amp. Would be nice to finally get this amp covered properly. 

[KaPH33n]

Bump.  Going to put stuff on eBay soon I think.

[futureryan]

Do you have any parts still? I just bought a bc bassfshing can and in need of a few parts.