Author Topic: MAME button config question (Read 1296 times)

Santoro · « **on:** May 05, 2012, 12:50:57 pm »

I would like to configure MAME such that whenever the original game didn't have P2 controls the P1 Controls are mirrored on my P2 controls.
I want this because on my narrow control panel there are some 1 player games where, for comfort, I'd like to use the P1 Joystick with the P2 buttons. I have set this up manually in MAME for some of my favorites, but it would sure be nice to have it done automatically.

I am running a newer release of MAME with a Minipac. Any advice would be appreciated.

JustMichael · « **Reply #1 on:** May 05, 2012, 02:20:18 pm »

As far as I'm aware you will have to set it up manually for each game you want. Mame should save the settings so you only have to set it up once for each game.

Hoopz · « **Reply #2 on:** May 07, 2012, 09:46:53 am »

Try CFG Magician to see if can do it. I haven't tried your scenario so I'm not sure. It's worth taking a look at though.

http://forum.arcadecontrols.com/index.php?topic=88948.0


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: MAME button config question (Read 1296 times)

Santoro

MAME button config question

JustMichael

Re: MAME button config question

Hoopz

Re: MAME button config question