Author Topic: FS (MAKE OFFER) Hagstrom Breakout Board, Trackball Encoders [South-FL] (Read 15321 times)

unclet · « **Reply #40 on:** May 25, 2012, 02:11:07 pm »

Oh yeah, should have noticed that. I looked through the progress of your racing cab and it looks great.

As for your logitech wheel question .... if the logitech wheel uses two 5K pots then I believe you could just connect the wires from the logitech pots to the gas/brake pedal assembly instead and everything should work. I am no expert, but seems reasonable to me. This is how I connected the gas/brake pedal assembly to a Microsoft USB Dual Strike controller originally.

Malenko · « **Reply #41 on:** May 26, 2012, 07:30:27 pm »

ok so how much shipped to 19702 if you (uncleT) rewire it for dual axis

EDIT: and can you measure the footprint of it for me?

unclet · « **Reply #42 on:** May 27, 2012, 08:47:12 am »

Quote

if you (uncleT) rewire it for dual axis

My one remaining Virtua racing gas/pedal assembly is currently wired for single-axis. Are you sure you want a dual-axis configuration as I thought most games in Mame were for single-axis play only?

If you do want a dual-axis wired configuration then simply snip the wire currently connecting the two POTs together (see photo below) and then connect each set of 3 wires coming from each POT to the associated POT on the logitech controller.

Keeping the assembly wired a single-axis will allow you to test the single-axis functionality out before "you" decide to snip the wire to convert it to dual-axis

Reading the following post might be helpful:

http://forum.arcadecontrols.com/index.php?topic=12551.0

Quote

how much shipped to 19702

I can get an exact shipping quote for you on Tuesday when I return back to work. It should be pretty cheap using my company's discounted FedEx shipping rate.

Quote

can you measure the footprint of it for me?

12-5/8" width x 11-3/8" depth. The assembly is very nice, sturdy and heavy-duty. Works great.

unclet · « **Reply #43 on:** May 29, 2012, 12:07:46 pm »

Quote

how much shipped to 19702

Malenko: I just sent you a PM with the shipping quote information

unclet · « **Reply #44 on:** June 03, 2012, 10:40:22 pm »

shifters and encoders still remain and cheap prices

unclet · « **Reply #45 on:** June 11, 2012, 09:03:40 pm »

updated main post to remove items which have already sold .....

unclet · « **Reply #46 on:** July 04, 2012, 09:06:37 am »

make me an offer on remaining items .....

unclet · « **Reply #47 on:** July 19, 2012, 09:20:36 am »

bump .. open for offers .... good stuff.

unclet · « **Reply #48 on:** July 25, 2012, 07:38:11 am »

PRICES DROPPED, now even cheaper prices. Need to get this stuff out of my closet.

HaRuMaN · « **Reply #49 on:** July 25, 2012, 09:37:49 am »

Could you get those two VO joys in a large flat rate box? (I don't have the funds at the moment, but I may soon).

unclet · « **Reply #50 on:** July 25, 2012, 07:50:57 pm »

HaRuMaN I sent you a PM

unclet · « **Reply #51 on:** August 11, 2012, 11:36:07 am »

bump .... stuff still available (make an offer)

unclet · « **Reply #52 on:** August 26, 2012, 08:35:08 pm »

bump .... stuff still available (make an offer)

prices are pretty cheap.

Desdinova · « **Reply #53 on:** August 28, 2012, 12:27:40 am »

I'm very interested in both VO sticks but the forum won't let me send a PM! I'm hoping that I can reply back to one of yours. Those are 8-ways if I remember right? Thanks!

unclet · « **Reply #54 on:** August 29, 2012, 07:35:35 am »

The joysticks have been sold

unclet · « **Reply #55 on:** September 06, 2012, 09:03:51 pm »

KE72 keyboard encoders now available .... super cheap

unclet · « **Reply #56 on:** September 20, 2012, 09:18:13 pm »

bump time

unclet · « **Reply #57 on:** October 07, 2012, 04:27:34 pm »

make a reasonable offer for anything you want.

unclet · « **Reply #58 on:** October 11, 2012, 03:16:45 pm »

forward/reverse shifter has been sold

Brian74 · « **Reply #59 on:** October 16, 2012, 06:34:10 pm »

I got the shifter today, thanks!

unclet · « **Reply #60 on:** October 22, 2012, 07:47:36 am »

Virtua Gas/Brake pedal assembly has been sold

unclet · « **Reply #61 on:** October 22, 2012, 04:18:00 pm »

KE24 encoder has been sold

unclet · « **Reply #62 on:** October 28, 2012, 08:15:49 am »

How about a nice encoder or shifter to give out as a Halloween treat? Just make an offer.

unclet · « **Reply #63 on:** November 03, 2012, 12:31:40 pm »

KE72 encoders are going to be listed on Ebay if no interest.

unclet · « **Reply #64 on:** November 04, 2012, 04:36:25 pm »

KE72 encoder on EBay:

http://www.ebay.com/itm/Hagstrom-KE72-keyboard-encoder-72-inputs-/140879552107?pt=LH_DefaultDomain_0&hash=item20cd135e6b

unclet · « **Reply #65 on:** November 08, 2012, 09:21:53 pm »

one KE72 has been sold. There is only one more KE72 available for sale . If no interest then I will put in on Ebay in a couple of weeks

ChadTower · « **Reply #66 on:** November 09, 2012, 11:23:53 am »

The KE72 is a very good encoder. It predates the more modern MAME targeted encoders but works just as well. It also has a lot more screwdown terminals than the more modern controllers.

I have a self contained MAME CP that uses one and it's great.

unclet · « **Reply #67 on:** November 25, 2012, 04:23:47 pm »

last KE72 encoder is now on Ebay:

http://www.ebay.com/itm/Hagstrom-KE72-keyboard-encoder-72-inputs-/140893551193?pt=LH_DefaultDomain_0&hash=item20cde8fa59

Eldritch1969 · « **Reply #68 on:** November 25, 2012, 04:32:47 pm »

Would have bought it, but "seller specified this item can't be shipped to France".
Well it's a shame...

unclet · « **Reply #69 on:** November 27, 2012, 07:47:37 am »

3-speed shifter has been sold

unclet · « **Reply #70 on:** December 03, 2012, 06:49:39 pm »

2-speed shifter in great condition still available

unclet · « **Reply #71 on:** December 13, 2012, 09:28:50 pm »

Arcade seat has been sold

unclet · « **Reply #72 on:** December 26, 2012, 03:37:38 pm »

last Hagstrom KE72 encoder has been sold.

Still have 2-speed High/Low shifter in very nice shape.

unclet · « **Reply #73 on:** January 19, 2013, 08:20:26 am »

the last arcade shifter has been sold.

All there is left is the Hagstrom Breakout board and some trackball encoders .

McHale · « **Reply #74 on:** June 19, 2013, 11:07:30 pm »

If you still have the Hagstrom IOX36, I'll take it. Tried to PM you, but as a newb, I couldn't.

-Mc


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: FS (MAKE OFFER) Hagstrom Breakout Board, Trackball Encoders [South-FL] (Read 15321 times)

Eldritch1969