Author Topic: I suck at prepareing artwork, but have a great place local to me to get prints.. (Read 5459 times)

pharoah007 · « **on:** April 16, 2012, 07:36:32 pm »

anyone want to help me get my art all sized correct so I can have it printed. I just fought with photoshop for about 1.5 hours...not my thing

.

I want to do a street fighter theme, and I have some artwork, I just need it sized correct.

I think this project could turn out awesome if I take the time and get the artwork right...

here is the naked beast...

If anyone is willing to help me out, I can provide the artwork I would like to be sized..but I am also open to suggestions as "finishing" is not my best skill

I am only concerned with control panel and side art.. the bezel will be painted glass.

wol-nz · « **Reply #1 on:** April 16, 2012, 09:41:25 pm »

I always find creating artwork for a control panel is way WAY harder than creating the control panel from the artwork template.
If you go for button halos then you need exact button placement measurements - so my suggestion would be to go for artwork that doesn't interact with the joystick or buttons (make sense?)

BASS! · « **Reply #2 on:** April 17, 2012, 09:26:15 pm »

If you want a print that just looks good and wont get cut off, I would just use a generic. http://www.gameongrafix.com/products/capcom-silver-generic-cpo2

pharoah007 · « **Reply #3 on:** April 17, 2012, 09:47:41 pm »

I am not concerned with button placement.

my problem is I have some art I want on the CP and sides, however, am having trouble sizing it correctly so I can have it printed.

BASS! · « **Reply #4 on:** April 17, 2012, 11:12:04 pm »

If you wanna take some measurements and post that art I'll size it for ya.
email em to uprightbass360@gmail

pharoah007 · « **Reply #5 on:** April 18, 2012, 07:58:35 pm »

Quote from: BASS! on April 17, 2012, 11:12:04 pm

If you wanna take some measurements and post that art I'll size it for ya.
email em to uprightbass360@gmail

Dude you rock.

I am busy tonight and tomorrow but I will get you everything Friday.

What file format would you like the pics in?

Will .jpg suffer form loss (archiving) if I email it to you?
when you edit?
when I re save to take to printers?

Thanks again

Z.

BASS! · « **Reply #6 on:** April 19, 2012, 10:52:51 pm »

You could just send em in the highest resolution that you have, just the original un edited files and I'll put em together

. talk soon amigo

--BASS--

pharoah007 · « **Reply #7 on:** April 20, 2012, 10:11:39 pm »

Quote from: BASS! on April 19, 2012, 10:52:51 pm

You could just send em in the highest resolution that you have, just the original un edited files and I'll put em together . talk soon amigo

--BASS--

Will do man.
I have been busy with work. I will try to get them off to you tomorrow along with a detailed drawing of the cab with measurements.

pharoah007 · « **Reply #8 on:** April 21, 2012, 12:39:44 pm »

would you like the measurements in Inches or CM/mm ?

pharoah007 · « **Reply #9 on:** April 21, 2012, 02:34:04 pm »

Ok... here we go..

This is what my "vision" is as of right now. This is posted for feedback. The 2 big issues right now are proportioning the side art to accommodate the big hole (will be a fan or speaker) or I could just fill it in and put fans/speaker elsewhere.

2nd issue is the CP, I "like" the art on the top half, however... the buttons are going to hide a lot of Ken...could some photoshop magic bring him over to the right where there are no buttons? It also looks like I intended for Ryu's fireball to be lined up with the joystick... this was not my intent.. I would actually like to SEE the fireball, lol

Everyone please chime in....

I want this thing to look AWESOME so any and all feedback is welcome.

pharoah007 · « **Reply #10 on:** April 22, 2012, 01:25:33 pm »

P.S.

BASS!.. dont think this is the actual artwork I would be sending you, lol

I have everything in High res / semi high res

Z.

BASS! · « **Reply #11 on:** April 25, 2012, 04:38:16 pm »

Hey buddy what is the full width of that control panel?

pharoah007 · « **Reply #12 on:** April 25, 2012, 05:07:21 pm »

Quote from: BASS! on April 25, 2012, 04:38:16 pm

Hey buddy what is the full width of that control panel?

oops, sorry man.

total CP width is 15 3/4 wide

BASS! · « **Reply #13 on:** April 25, 2012, 05:22:44 pm »

cool beans. So far this is where I'm at.

BASS! · « **Reply #14 on:** April 25, 2012, 05:29:58 pm »

Here it is without that logo on the front.

pharoah007 · « **Reply #15 on:** April 25, 2012, 06:14:16 pm »

LOVING IT!

What about moving the Capcom logo to the top, above the hole?

Either way, AWESOME start man!

BASS! · « **Reply #16 on:** April 28, 2012, 03:42:12 pm »

Allright, found some more time. Here is some more.

pharoah007 · « **Reply #17 on:** April 28, 2012, 05:03:17 pm »

Quote from: BASS! on April 28, 2012, 03:42:12 pm

Allright, found some more time. Here is some more.

Dude... you are a god among men! Looking AWESOME.

I was thinking.. due to the "hole" being kinda in Ryu's head... what about moving the whole pic (characters) down a bit then filling the top with the background?

Just a thought.

This is coming along WAY nice!

pharoah007 · « **Reply #18 on:** May 18, 2012, 03:05:12 pm »

Just checking this post from Beautiful Punta Cana!!

No arcade machines down here

BASS! · « **Reply #19 on:** May 20, 2012, 01:51:29 am »

Hey there dude. I have my rig in storage for a minute, should be getting it back soon so we can finish this up:) Talk soon!

--==BASS==--

pharoah007 · « **Reply #20 on:** May 23, 2012, 08:42:31 pm »

Quote from: BASS! on May 20, 2012, 01:51:29 am

Hey there dude. I have my rig in storage for a minute, should be getting it back soon so we can finish this up:) Talk soon!

--==BASS==--

Hey man, no rush.

Let me know if there is anything I can do to help.

pharoah007 · « **Reply #21 on:** June 26, 2012, 09:00:29 pm »

Bump

Ever get your rig out of storage man?

BASS! · « **Reply #22 on:** July 07, 2012, 11:33:26 pm »

Alright here we go. New house, new desk, new ideas. New work starting soon. Keep posted.

pharoah007 · « **Reply #23 on:** July 12, 2012, 09:07:08 pm »

Quote from: BASS! on July 07, 2012, 11:33:26 pm

Alright here we go. New house, new desk, new ideas. New work starting soon. Keep posted.

pharoah007 · « **Reply #24 on:** August 18, 2012, 11:09:58 pm »

Still drooling


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news