Author Topic: Mk1 in SF2 cab (Read 1730 times)

matrix00 · « **on:** January 05, 2012, 11:54:32 pm »

I am shaping my sf2 hyper fighter with mk1 everything works but I get no audio.

Any ideas why no audio?

Nephasth · « **Reply #1 on:** January 06, 2012, 12:00:36 am »

Do you have the sound board for MK1 as well? Or just the game PCB?

Looks like this and connects to the main PCB with a ribbon cable.

matrix00 · « **Reply #2 on:** January 06, 2012, 12:14:57 am »

I have the sound board aswell.

Nephasth · « **Reply #3 on:** January 06, 2012, 12:23:53 am »

Is the sound board wired properly?

ctozzi · « **Reply #4 on:** January 06, 2012, 12:43:27 pm »

Make sure the ribbon cable RED end is plugged into pin 1 on each board. Do you get the BONG on boot up ?

HaRuMaN · « **Reply #5 on:** January 06, 2012, 01:05:58 pm »

MK is one of those boards that needs -5V (I think). Are you getting -5V?

matrix00 · « **Reply #6 on:** January 07, 2012, 11:01:57 am »

I ordered the sound pot. Which I did not have I am hoping that fixes the no sound issue.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news